Доброго времени суток.Моя система: SunOS 5.9 Generic_118558-21 sun4u sparc SUNW,Sun-Fire-V240
Пытался замонтировать USB флешь-накопитель на Sun V240.
После:
/etc/init.d/volmgt stop
/etc/init.d/volmgt start
Машина повисла и не загружалась, пока флешка не была извлечена.
После этого при загрузке выходят следующие ошибки:
sorry, variable 'pts_count' is not defined in the 'kernel'
Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
WARNING: forceload of misc/md_trans failed
WARNING: forceload of misc/md_raid failed
WARNING: forceload of misc/md_sp failed
ostname: server1
Error: Unable to open file or library.
Warning: An error occurred during initialization of PowerPath.
Setting up paths
Error: Unable to open file or library.
emcpmgr: internal library error (0xebad008)
NO valid mapping entries in conf file!
The system is coming up. Please wait.
mount: /dev/dsk/emcpower1c no such device
mount: /dev/dsk/emcpower0c no such device
mount: /dev/dsk/emcpower2c no such device
Jun 18 19:59:04 resbo scsi: WARNING: /pci@1e,600000/ide@d/sd@0,0 (sd30):
Jun 18 19:59:04 resbo transport rejected bad packet
volume management starting.
The system is ready.
---
На данный момент ситуация такая:
диски с масива не монтируются из /dev/dsk/ - ошибка "No such device"
powermt не показывает pseudoname
#powermt display dev=all
CLARiiON ID=H0B822J
Logical device ID=6006016007401763427F6792B65F8DA11
state=alive; policy=CLAROpt; priority=0; queued-IOs=0
Owner: default=SP B, current=SP B
==============================================================================
---------------- Host --------------- - Stor - -- I/O Path - -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
3072 pci@1e/SUNW,qlc@2 c3t50060103021BC6Fd2s0 SP A0 active alive 0 0
3072 pci@1e/SUNW,qlc@2 c3t500601683021BC6Fd2s0 SP B0 active alive 0 0
3073 pci@1e/SUNW,qlc@3 c4t500601603021BC6Fd2s0 SP A0 active alive 0 0
3073 pci@1e/SUNW,qlc@3 c4t500601683021BC6Fd2s0 SP B0 active alive 0 0
CLARiiON ID=H0B822J
Logical device ID=600601600740170069E91BF964F8DA11
state=alive; policy=CLAROpt; priority=0; queued-IOs=0
Owner: default=SP A, current=SP A
==============================================================================
---------------- Host --------------- - Stor - -- I/O Path - -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
3072 pci@1e/SUNW,qlc@2 c3t500601603021BC6Fd0s0 SP A0 active alive 0 0
3072 pci@1e/SUNW,qlc@2 c3t500601683021BC6Fd0s0 SP B0 active alive 0 0
3073 pci@1e/SUNW,qlc@3 c4t500601603021BC6Fd0s0 SP A0 active alive 0 0
3073 pci@1e/SUNW,qlc@3 c4t500601683021BC6Fd0s0 SP B0 active alive 0 0
CLARiiON ID=H0B822J
Logical device ID=60060160074017006AE91BF964F8DA11
state=alive; policy=CLAROpt; priority=0; queued-IOs=0
Owner: default=SP B, current=SP B
==============================================================================
---------------- Host --------------- - Stor - -- I/O Path - -- Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs Errors
==============================================================================
3072 pci@1e/SUNW,qlc@2 c3t500601603021BC6Fd1s0 SP A0 active alive 0 0
3072 pci@1e/SUNW,qlc@2 c3t500601683021BC6Fd1s0 SP B0 active alive 0 0
3073 pci@1e/SUNW,qlc@3 c4t500601603021BC6Fd1s0 SP A0 active alive 0 0
3073 pci@1e/SUNW,qlc@3 c4t500601683021BC6Fd1s0 SP B0 active alive 0 0
# powercf check
NO valid mapping entries in conf file!
Мне необходимо замонтировать диски без потери информации.
Может кто знает как с этим боротся =)
Спасибо.
Вариант для распечатки
OpenNET: Виртуальная конференция (Public)
(ok) on 18-Июн-09, 19:31 
