В манах прочёл что Intel High DefiNition Audio Controller (ICH6) (система стоит на ноутбуке) в релизе FreeBSD 6.1 поддерживается. В /boot/loader.conf добавляю snd_ich_load="YES". Но звуковуха не определяется. Может там ещё что нужно "подкрутить"?
Заранее спасибо!

===pciconf
hostb0@pci0:0:0:    class=0x060000 card=0x19771043 chip=0x25908086 rev=0x04 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82915PM/GM/GMS, 82910GML Host Bridge'
    class    = bridge
    subclass = HOST-PCI
pcib1@pci0:1:0:    class=0x060400 card=0x00000088 chip=0x25918086 rev=0x04 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82915PM/GM PCI Express Graphics Port'
    class    = bridge
    subclass = PCI-PCI
none0@pci0:27:0:    class=0x040300 card=0x11731043 chip=0x26688086 rev=0x04 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801FB/FR/FW/FRW Intel High DefiNition Audio Controller'
    class    = multimedia
uhci0@pci0:29:0:    class=0x0c0300 card=0x11771043 chip=0x26588086 rev=0x04 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801FB/FR/FW/FRW USB UHCI Controller'
    class    = serial bus
    subclass = USB
uhci1@pci0:29:1:    class=0x0c0300 card=0x11771043 chip=0x26598086 rev=0x04 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801FB/FR/FW/FRW USB UHCI Controller'
    class    = serial bus
    subclass = USB
uhci2@pci0:29:2:    class=0x0c0300 card=0x11771043 chip=0x265a8086 rev=0x04 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801FB/FR/FW/FRW USB UHCI Controller'
    class    = serial bus
    subclass = USB
uhci3@pci0:29:3:    class=0x0c0300 card=0x11771043 chip=0x265b8086 rev=0x04 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801FB/FR/FW/FRW USB UHCI Controller'
    class    = serial bus
    subclass = USB
ehci0@pci0:29:7:    class=0x0c0320 card=0x11771043 chip=0x265c8086 rev=0x04 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801FB/FR/FW/FRW USB 2.0 EHCI Controller'
    class    = serial bus
    subclass = USB
pcib2@pci0:30:0:    class=0x060401 card=0x00000050 chip=0x24488086 rev=0xd4 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge'
    class    = bridge
    subclass = PCI-PCI
isab0@pci0:31:0:    class=0x060100 card=0x00000000 chip=0x26418086 rev=0x04 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801FBM ICH6M LPC Interface Bridge'
    class    = bridge
    subclass = PCI-ISA
atapci0@pci0:31:1:    class=0x01018a card=0x11771043 chip=0x266f8086 rev=0x04 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801FB/FBM Ultra ATA Storage Controllers - 266F'
    class    = mass storage
    subclass = ATA
nvidia0@pci1:0:0:    class=0x030000 card=0x12121043 chip=0x01d710de rev=0xa1 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = display
    subclass = VGA
skc0@pci2:0:0:    class=0x020000 card=0x173c1043 chip=0x432011ab rev=0x13 hdr=0x00
    vendor   = 'Marvell Semiconductor (Was: Galileo Technology Ltd)'
    device   = '88E8001/8003/8010 Gigabit Ethernet Controller with Integrated PHY (copper)'
    class    = network
    subclass = ethernet
cbb0@pci2:1:0:    class=0x060700 card=0x11771043 chip=0x04761180 rev=0xb3 hdr=0x02
    vendor   = 'Ricoh Co Ltd'
    device   = 'RL5c476 CardBus Controller'
    class    = bridge
    subclass = PCI-CardBus
fwohci0@pci2:1:1:    class=0x0c0010 card=0x11771043 chip=0x05521180 rev=0x08 hdr=0x00
    vendor   = 'Ricoh Co Ltd'
    device   = 'RL5c552 IEEE-1394 Controller'
    class    = serial bus
    subclass = FireWire
none1@pci2:1:2:    class=0x080500 card=0x11771043 chip=0x08221180 rev=0x17 hdr=0x00
    vendor   = 'Ricoh Co Ltd'
    device   = 'SD Bus Host Adapter'
    class    = base peripheral
none2@pci2:1:3:    class=0x088000 card=0x11771043 chip=0x05921180 rev=0x08 hdr=0x00
    vendor   = 'Ricoh Co Ltd'
    device   = 'Memory Stick Bus Host Adapter'
    class    = base peripheral
none3@pci2:3:0:    class=0x028000 card=0x27018086 chip=0x42208086 rev=0x05 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = 'PRO/Wireless 2200BG Network Connection'
    class    = network

=====dmesg
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE #0: Sun May  7 04:32:43 UTC 2006
    root@opus.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <A M I  OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.80GHz (1795.51-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6d6  Stepping = 6
  Features=0xafe9fbbf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  Features2=0x180<EST,TM2>
real memory  = 536608768 (511 MB)
avail memory = 507367424 (483 MB)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0
acpi0: reservation of fed20000, 70000 (3) failed
acpi0: reservation of ffb00000, 100000 (3) failed
acpi0: reservation of fec00000, 1000 (3) failed
acpi0: reservation of fee00000, 1000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce Go 7300> mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xfc000000-0xfcffffff irq 16 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
pci0: <multimedia> at device 27.0 (no driver attached)
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0xe480-0xe49f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0xe800-0xe81f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0xe880-0xe89f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0xec00-0xec1f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xfebfbc00-0xfebfbfff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ugen0: Syntek USB2.0, rev 2.00/0.05, addr 2
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
skc0: <Marvell Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeafc000-0xfeafffff irq 20 at device 0.0 on pci2
skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:18:f3:4a:5f:b3
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
cbb0: <RF5C476 PCI-CardBus Bridge> at device 1.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <Ricoh R5C552> mem 0xfeafb000-0xfeafb7ff irq 18 at device 1.1 on pci2
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:18:00:03:68:83:d7
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:18:68:83:d7
fwe0: Ethernet address: 02:e0:18:68:83:d7
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci2: <base peripheral> at device 1.2 (no driver attached)
pci2: <base peripheral> at device 1.3 (no driver attached)
pci2: <network> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <Generic IRDA-compatible device> port 0x2f8-0x2ff irq 3 flags 0x10 on acpi0
sio0: type 16550A
ppc0: <ECP parallel printer port> port 0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/21.00, addr 2, iclass 3/1
ums0: 8 buttons and Z dir.
Timecounter "TSC" frequency 1795512742 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 76319MB <HTS541080G9AT00 MB4OA60A> at ata0-master UDMA100
acd0: DVDR <TSSTcorpCD/DVDW TS-L632D/as99> at ata0-slave UDMA33
Trying to mount root from ufs:/dev/ad0s4a