>Покажи sh int порта, который к серверу подключен.
>20% - это на сервере загрузка?
Да 20% загрузка процессора сервера.ciscoVE_1#sh int GigabitEthernet 0/1
GigabitEthernet0/1 is up, line protocol is up (connected)
Hardware is Gigabit Ethernet, address is 000a.f49a.ab19 (bia 000a.f49a.ab19)
Description: radio1
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not set
Full-duplex, 1000Mb/s, link type is auto, media type is 1000BaseTX
input flow-control is off, output flow-control is on
ARP type: ARPA, ARP Timeout 04:00:00
1000BaseT module (WS-G5483) in GBIC slot.
Last input never, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 4000 bits/sec, 3 packets/sec
5 minute output rate 26000 bits/sec, 5 packets/sec
314610 packets input, 184069247 bytes, 0 no buffer
Received 449 broadcasts (0 multicast)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 2 multicast, 0 pause input
0 input packets with dribble condition detected
352385 packets output, 184603925 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 PAUSE output
0 output buffer failures, 0 output buffers swapped out