Привет всем. Есть такая проблема.
Работают компы в удалённом офисе с апликацией на главном MS-SQL-2005. Жалуются что переодически (редко) выбрасывает из из апликации. Есть подозрение на Packet losts. Линия чистая. Вот что я вижу в sh int s0/0Serial0/0 is up, line protocol is up
Hardware is PowerQUICC Serial
Description: *** 2M Super FR ***
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
reliability 255/255, txload 16/255, rxload 93/255
Encapsulation FRAME-RELAY IETF, loopback not set
Keepalive set (10 sec)
LMI enq sent 129643, LMI stat recvd 129604, LMI upd recvd 0, DTE LMI up
LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0
LMI DLCI 0 LMI type is ANSI Annex D frame relay DTE
Broadcast queue 0/64, broadcasts sent/dropped 1031793/1, interface broadcasts
1003495
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters 2w1d
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 165
Queueing strategy: weighted fair
Output queue: 0/4096/64/165 (size/max total/threshold/drops)
Conversations 0/4/256 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
Available Bandwidth 1158 kilobits/sec
30 second input rate 564000 bits/sec, 162 packets/sec
30 second output rate 98000 bits/sec, 115 packets/sec
68288227 packets input, 3925751066 bytes, 0 no buffer
Received 319729 broadcasts, 0 runts, 0 giants, 0 throttles
3 input errors, 0 CRC, 2 frame, 0 overrun, 0 ignored, 1 abort
58742266 packets output, 1170666976 bytes, 0 underruns
0 output errors, 0 collisions, 14 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
DCD=up DSR=up DTR=up RTS=up CTS=up
Как определить есть ли Packet losts и что вообще это может быть?
Дурею уже от этого...