>sh ver покажите rommon 1 >
rommon 1 > boot
program load complete, entry point: 0x80008000, size: 0x51778c
Self decompressing the image : #################################################
############################################## [OK]
Smart Init is enabled
smart init is sizing iomem
ID MEMORY_REQ TYPE
MainBoard 0X00027A80 1721
0X000F3BB0 public buffer pools
0X00211000 public particle pools
0X0002 0X0000DC00 Card in slot 0
TOTAL: 0X0033A230
If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.
Allocating additional 1569768 bytes to IO Memory.
PMem allocated: 28600808 bytes; IOMem allocated: 4953624 bytes
C1700 Software (C1700-Y-M), Version 12.2(15)T1, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Compiled Thu 27-Mar-03 16:03 by ccai
Image text-base: 0x80008120, data-base: 0x8098F2BC
cisco 1721 (MPC860P) processor (revision 0x100) with 27930K/4838K bytes of memor
y.
Processor board ID FOC071519X2 (2355180040), with hardware revision 0000
MPC860P processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
1 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
--- System Configuration Dialog ---
Would you like to enter the initial configuration dialog? [yes/no]:
Вариант для распечатки
Маршрутизаторы CISCO и др. оборудование. (Public)
(ok) on 11-Окт-07, 14:36 
