>Где привязка route-map к Vlan1 ? Фигню спорол....Не нужна...
Вот кусок рабочего конфига (основной и резервный провайдер)...Сравнивай
track timer interface 5
track timer ip route 20
!
track 1 ip sla 1 reachability
delay down 10 up 30
!
interface TO_ISPI
description TRUNK to ISPI
ip address Y.Y.Y.Y 255.255.255.0
ip nat outside
ip virtual-reassembly
no cdp enable
!
interface TO_ISPII
description TRUNK to ISPII
ip address Z.Z.Z.Z 255.255.255.0
ip nat outside
ip virtual-reassembly
no cdp enable
!
interface INTERTNAL
description Internal LAN
ip address X.X.X.1 255.255.255.0
ip nat inside
ip virtual-reassembly
!
ip local policy route-map 123
ip route 0.0.0.0 0.0.0.0 ISPI_GW track 1
ip route 0.0.0.0 0.0.0.0 ISPII_GW 10
ip nat inside source route-map ISPI_map interface TO_ISPI overload
ip nat inside source route-map ISPII_map interface TO_ISPII overload
ip access-list standard route_back
permit ISPII_GW
ip access-list extended to_nat
permit ip X.X.X.0 0.0.0.255 any
!
ip sla 1
icmp-echo ISPI_GW
timeout 4000
threshold 20
frequency 6
ip sla schedule 1 life forever start-time now
!
!
!
route-map 123 permit 10
description ROUTE BACK ISPII
match ip address route_back
set ip next-hop ISPII_GW
!
route-map ISPI_map permit 10
match ip address to_nat
match interface TO_ISPI
!
route-map ISPII_map permit 10
match ip address to_nat
match interface TO_ISPII
!
!!!В качестве бонуса !!!
event manager applet clear_nat
event track 1 state any
action 1.0 cli command "enable"
action 2.0 cli command "clear ip nat translation *"
action 3.0 cli command "clear ip nat translation forced"
action 4.0 syslog msg "Clear NAT-table complite"