The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

форумы  помощь  поиск  регистрация  майллист  вход/выход  слежка  RSS
"Прошу помощи в реализации сети"
Вариант для распечатки  
Пред. тема | След. тема 
Форум Маршрутизаторы CISCO и др. оборудование. (Маршрутизация)
Изначальное сообщение [ Отслеживать ]

"Прошу помощи в реализации сети"  +/
Сообщение от Ivan Pomidorov (ok) on 15-Дек-10, 10:15 
Здравствуйте.
Прошу помощи в реализации одной схемы. Рисунок сети прилагаю.
http://www.sharemania.ru/0167584
Суть такая: на объекте стоит маршрутизатор R3 (cisco 2600XM) и коммутатор S2 (cisco 2950). Также там есть  устройство с двумя IP (ну по сути это два устройства), один интерфейс воткнут в коммутатор, другой в маршрутизатор. Оба IP должны опрашиваться с маршрутизатора R1 (cisco 2851).
R3 по потоку e1 соединен с R1, это один из каналов (условно назовем «основной»).
S2 через арендованную сеть подключен к S1 (cisco 2960) по vlan4, S1 связан с R2 (cisco 2821) по транку, который в свою очередь связан с R1 по нашей локалке (это «резервный» канал). На всех маршрутизаторах поднят OSPF, в который прописаны все описанные сети.

Предполагалось, что такая схема обеспечит резервирование по каналам (при пропадании одного из каналов оба IP продолжают пинговаться) и по железу (при выходе из строя R3 адрес 192.168.6.25 остается доступным, при выходе из строя S2 192.168.6.8 остается доступным).

Однако так как хотелось не получается. При разрыве резервного канала интерфейс gi 0/0.4 на R2 не падает, а значит R2 продолжает отсылать ospf сообщения, о том что сеть 192.168.6.16/28 лежит за его интерфесом. Из-за этого 192.168.6.25 становиться недоступным.

Подскажите, можно ли на данном железе организовать описанную схему? Если можно, то что подправить?

Ответить | Правка | Cообщить модератору

Оглавление

Сообщения по теме [Сортировка по времени | RSS]


1. "Прошу помощи в реализации сети"  +/
Сообщение от aZL on 15-Дек-10, 12:44 
Вопрос, конечно же, в настройке ospf, посему хотелось бы осмотреть соотв.части конфигов R3 и R2
Ответить | Правка | ^ к родителю #0 | Наверх | Cообщить модератору

2. "Прошу помощи в реализации сети"  +/
Сообщение от Ivan Pomidorov (ok) on 15-Дек-10, 14:15 
R3#sh ip proto
Routing Protocol is "ospf 1"
  Outgoing update filter list for all interfaces is not set
  Incoming update filter list for all interfaces is not set
  Router ID 10.10.10.6
  Number of areas in this router is 1. 1 normal 0 stub 0 nssa
  Maximum path: 4
  Routing for Networks:
    10.10.10.6 0.0.0.0 area 0
    192.168.6.0 0.0.0.15 area 0
    192.168.6.16 0.0.0.15 area 0
    192.168.6.40 0.0.0.7 area 0
  Passive Interface(s):
    VoIP-Null0
  Routing Information Sources:
    Gateway         Distance      Last Update
    (this router)        110      3w5d
    10.10.10.6           110      04:25:00
    192.169.3.10         110      04:20:05
    192.168.4.5          110      04:20:05
    192.168.4.1          110      04:20:05
    192.168.4.2          110      04:20:05
    192.169.3.21         110      4d19h
    172.30.252.193       110      04:20:05
    192.169.140.9        110      04:20:14
    192.169.140.10       110      04:20:14
    172.30.66.1          110      04:20:15
  Distance: (default is 110)

R3#sh ip ospf 1
Routing Process "ospf 1" with ID 10.10.10.6
Supports only single TOS(TOS0) routes
Supports opaque LSA
Supports Link-local Signaling (LLS)
Supports area transit capability
Initial SPF schedule delay 5000 msecs
Minimum hold time between two consecutive SPFs 10000 msecs
Maximum wait time between two consecutive SPFs 10000 msecs
Incremental-SPF disabled
Minimum LSA interval 5 secs
Minimum LSA arrival 1000 msecs
LSA group pacing timer 240 secs
Interface flood pacing timer 33 msecs
Retransmission pacing timer 66 msecs
Number of external LSA 21. Checksum Sum 0x17750E
Number of opaque AS LSA 0. Checksum Sum 0x000000
Number of DCbitless external and opaque AS LSA 0
Number of DoNotAge external and opaque AS LSA 0
Number of areas in this router is 1. 1 normal 0 stub 0 nssa
Number of areas transit capable is 0
External flood list length 0
    Area BACKBONE(0)
        Number of interfaces in this area is 4 (1 loopback)
        Area has no authentication
        SPF algorithm last executed 04:29:10.972 ago
        SPF algorithm executed 26 times
        Area ranges are
        Number of LSA 26. Checksum Sum 0x18D069
        Number of opaque link LSA 0. Checksum Sum 0x000000
        Number of DCbitless LSA 0
        Number of indication LSA 0
        Number of DoNotAge LSA 0
        Flood list length 0

R2#sh ip proto
Routing Protocol is "ospf 1"
  Outgoing update filter list for all interfaces is not set
  Incoming update filter list for all interfaces is not set
  Router ID 192.169.140.10
  It is an autonomous system boundary router
  Redistributing External Routes from,
    static, includes subnets in redistribution
    ospf 5, includes subnets in redistribution
  Number of areas in this router is 1. 1 normal 0 stub 0 nssa
  Maximum path: 4
  Routing for Networks:
    172.30.196.32 0.0.0.15 area 0
    192.168.4.0 0.0.0.255 area 0
    192.168.6.16 0.0.0.15 area 0
    192.168.6.32 0.0.0.7 area 0
    192.169.1.0 0.0.0.255 area 0
    192.169.3.4 0.0.0.3 area 0
    192.169.3.12 0.0.0.3 area 0
    192.169.3.16 0.0.0.3 area 0
    192.169.3.20 0.0.0.3 area 0
    192.169.3.24 0.0.0.3 area 0
    192.169.140.0 0.0.0.255 area 0
  Passive Interface(s):
    Serial0/3/1:0
    NVI0
    VoIP-Null0
  Routing Information Sources:
    Gateway         Distance      Last Update
    (this router)        110      3w5d
    10.10.10.13          110      6w1d
    10.0.0.2             110      6w1d
    10.10.10.6           110      04:22:31
    10.0.4.2             110      6w1d
    192.169.3.10         110      04:22:32
    192.168.4.5          110      04:22:32
    192.168.4.1          110      04:22:32
    192.168.4.2          110      04:22:33
    192.168.1.19         110      7w6d
    192.169.21.1         110      6w1d
    192.169.3.21         110      4d19h
    192.169.23.1         110      6w6d
    172.30.252.193       110      04:22:33
    192.169.140.9        110      04:22:34
    192.169.140.8        110      7w6d
    172.30.66.1          110      04:22:34
  Distance: (default is 110)


R2#sh ip ospf 1
Routing Process "ospf 1" with ID 192.169.140.10
Supports only single TOS(TOS0) routes
Supports opaque LSA
Supports Link-local Signaling (LLS)
Supports area transit capability
It is an autonomous system boundary router
Redistributing External Routes from,
    static, includes subnets in redistribution
    ospf 5, includes subnets in redistribution
Initial SPF schedule delay 5000 msecs
Minimum hold time between two consecutive SPFs 10000 msecs
Maximum wait time between two consecutive SPFs 10000 msecs
Incremental-SPF disabled
Minimum LSA interval 5 secs
Minimum LSA arrival 1000 msecs
LSA group pacing timer 240 secs
Interface flood pacing timer 33 msecs
Retransmission pacing timer 66 msecs
Number of external LSA 21. Checksum Sum 0x0D0619
Number of opaque AS LSA 0. Checksum Sum 0x000000
Number of DCbitless external and opaque AS LSA 0
Number of DoNotAge external and opaque AS LSA 0
Number of areas in this router is 1. 1 normal 0 stub 0 nssa
Number of areas transit capable is 0
External flood list length 0
    Area BACKBONE(0)
        Number of interfaces in this area is 7
        Area has no authentication
        SPF algorithm last executed 04:23:30.016 ago
        SPF algorithm executed 13116 times
        Area ranges are
        Number of LSA 26. Checksum Sum 0x0BD7D1
        Number of opaque link LSA 0. Checksum Sum 0x000000
        Number of DCbitless LSA 0
        Number of indication LSA 0
        Number of DoNotAge LSA 0
        Flood list length 0

Ответить | Правка | ^ к родителю #1 | Наверх | Cообщить модератору

3. "Прошу помощи в реализации сети"  +/
Сообщение от VolanD (ok) on 17-Дек-10, 13:28 
>[оверквотинг удален]
> Checksum Sum 0x0BD7D1
>         Number of opaque link
> LSA 0. Checksum Sum 0x000000
>         Number of DCbitless LSA
> 0
>         Number of indication LSA
> 0
>         Number of DoNotAge LSA
> 0
>         Flood list length 0

sh ip ro?

Ответить | Правка | ^ к родителю #2 | Наверх | Cообщить модератору

Архив | Удалить

Рекомендовать для помещения в FAQ | Индекс форумов | Темы | Пред. тема | След. тема




Партнёры:
PostgresPro
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2025 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру