форумы  помощь  поиск  регистрация  майллист  ВХОД  слежка

Вариант для распечатки		Архивированная нить - только для чтения!  Пред. тема | След. тема
Форумы Маршрутизаторы CISCO и др. оборудование. (Public)
Изначальное сообщение		[Проследить за развитием треда]

"Волнующие строки"
Сообщение от A Clockwork Orange on 24-Окт-03, 16:30  (MSK)
System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1) Copyright (c) 1999 by cisco Systems, Inc. C1700 platform with 49152 Kbytes of main memory program load complete, entry point: 0x80008000, size: 0x44f524 Self decompressing the image : ################################################# ################################################################################ ################################################################################ ################################################################################ ################################################################################ ################################################################################ ####################################################################### [OK]               Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013.            cisco Systems, Inc.            170 West Tasman Drive            San Jose, California 95134-1706 Cisco Internetwork Operating System Software IOS (tm) C1700 Software (C1700-SY56I-M), Version 12.1(1)XC, EARLY DEPLOYMENT REL EASE SOFTWARE (fc1) TAC:Home:SW:IOS:Specials for info Copyright (c) 1986-2000 by cisco Systems, Inc. Compiled Thu 23-Mar-00 15:45 by susingh Image text-base: 0x800080DC, data-base: 0x808B1F98 Compliance with U.S. Export Laws and Regulations - Encryption This product performs encryption and is regulated for export by the U.S. Government. This product is not authorized for use by persons located outside the United States and Canada that do not have prior approval from Cisco Systems, Inc. or the U.S. Government. This product may not be exported outside the U.S. and Canada either by physical or electronic means without PRIOR approval of Cisco Systems, Inc. or the U.S. Government. Persons outside the U.S. and Canada may not re-export, resell, or transfer this product by either physical or electronic means without  prior approval of Cisco Systems, Inc. or the U.S. Government. cisco 1720 (MPC860) processor (revision 0x601) with 36864K/12288K bytes of memor y. Processor board ID JAD042504C1 (49431052), with hardware revision 0000 M860 processor: part number 0, mask 32 Bridging software. X.25 software, Version 3.0.0. Basic Rate ISDN software, Version 1.1. 1 FastEthernet/IEEE 802.3 interface(s) 2 Low-speed serial(sync/async) network interface(s) 1 ISDN Basic Rate interface(s) 32K bytes of non-volatile configuration memory. 8192K bytes of processor board System flash (Read/Write) Press RETURN to get started! 00:00:09: %SSH-5-ENABLED: SSH 1.5 has been enabled 00:00:12: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:1, changed state to down 00:00:12: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:2, changed state to down ____________________________ ВОТ ЭТИ СТРОКИ МЕНЯ ВОЛНУЮТ, ЧТО ЭТО?! ЧТО ЗА РЕСТАРТ И ПОЧЕМУ СНОВА ПОЯВИЛИСЬ СВЕДЕНИЯ ОБ IOS? 00:00:13: %SYS-5-CONFIG_I: Configured from memory by console 00:00:13: %SYS-5-RESTART: System restarted -- Cisco Internetwork Operating System Software IOS (tm) C1700 Software (C1700-SY56I-M), Version 12.1(1)XC, EARLY DEPLOYMENT REL EASE SOFTWARE (fc1) TAC:Home:SW:IOS:Specials for info Copyright (c) 1986-2000 by cisco Systems, Inc. Compiled Thu 23-Mar-00 15:45 by susingh И СНОВА НОРМАЛЬНОЕ ПРОДОЛЖЕНИЕ ________________________________________________________________ 00:00:13: %LINK-3-UPDOWN: Interface Serial1, changed state to down 00:00:13: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up 00:00:13: %LINK-3-UPDOWN: Interface BRI0, changed state to up 00:00:13: %LINK-5-CHANGED: Interface Serial0, changed state to administratively down 00:00:15: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, changed state to down 00:00:15: %LINEPROTO-5-Translating "CisUPDOWN: Line protocol on Interface FastEt hernet0, changed state to up 00:00:15: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state to downco1720" 00:00:22: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to down User Access Verification Password:
	Рекомендовать в FAQ | Cообщить модератору | Наверх

Индекс форумов | Темы | Пред. тема | След. тема

Сообщения по теме

1. "Волнующие строки"
Сообщение от ВОЛКА on 24-Окт-03, 16:36  (MSK)
sh run sh flash
	Рекомендовать в FAQ | Cообщить модератору | Наверх

	2. "Волнующие строки"
	Сообщение от A Clockwork Orange on 24-Окт-03, 16:42  (MSK)
	>sh run >sh flash Cisco1720#sho ver Cisco Internetwork Operating System Software IOS (tm) C1700 Software (C1700-SY56I-M), Version 12.1(1)XC, EARLY DEPLOYMENT REL EASE SOFTWARE (fc1) TAC:Home:SW:IOS:Specials for info Copyright (c) 1986-2000 by cisco Systems, Inc. Compiled Thu 23-Mar-00 15:45 by susingh Image text-base: 0x800080DC, data-base: 0x808B1F98 ROM: System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1) ROM: C1700 Software (C1700-SY56I-M), Version 12.1(1)XC, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) Cisco1720 uptime is 12 minutes System returned to ROM by reload System image file is "flash:c1700-sy56i-mz.121-1.XC" cisco 1720 (MPC860) processor (revision 0x601) with 36864K/12288K bytes of memor y. Processor board ID JAD042504C1 (49431052), with hardware revision 0000 M860 processor: part number 0, mask 32 Bridging software. X.25 software, Version 3.0.0. Basic Rate ISDN software, Version 1.1. 1 FastEthernet/IEEE 802.3 interface(s) 2 Low-speed serial(sync/async) network interface(s) 1 ISDN Basic Rate interface(s) 32K bytes of non-volatile configuration memory. 8192K bytes of processor board System flash (Read/Write) Configuration register is 0x2102 Cisco1720# ____________ Cisco1720#sho run Building configuration... Current configuration: ! version 12.1 service timestamps debug uptime service timestamps log uptime service password-encryption ! hostname Cisco1720 ! logging buffered 4096 notifications enable password 7 141511595D36051E67 ! ! ! ! ! memory-size iomem 25 ip subnet-zero no ip domain-lookup ip domain-name orange.org no ip dhcp conflict logging ! ip dhcp pool mobile    network 192.168.1.0 255.255.255.0    domain-name strs.ru    dns-server 212..... 195.68.135.5 ! ip ssh time-out 120 ip ssh authentication-retries 3 isdn switch-type basic-net3 ! ! cns event-service server ! ! ! interface Serial0 no ip address shutdown ! interface Serial1 backup delay 10 10 backup interface Dialer1 ip address 21... 255.255.255.252 ip nat outside encapsulation ppp no cdp enable ! interface BRI0 description connected to Internet no ip address encapsulation ppp dialer rotary-group 1 isdn switch-type basic-net3 no cdp enable ! interface FastEthernet0 description connected to EthernetLAN ip address 141.108.193... 255.255.255.240 speed auto ! interface Dialer0 no ip address no cdp enable ! interface Dialer1 description connected to Internet ip address 132.93..... 255.255.255.0 encapsulation ppp no ip split-horizon dialer in-band dialer idle-timeout 300 dialer string 985022241891 dialer hold-queue 10 dialer load-threshold 1 outbound dialer-group 1 no cdp enable ppp authentication chap pap callin ppp chap hostname d943e7ka ppp chap password 7 141D1D0E2D212E ppp pap sent-username d9 password 7 060C0E130F ppp multilink ! router rip version 2 passive-interface Dialer1 network 192.168.1.0 no auto-summary ! ip nat inside source route-map comstar interface Dialer1 overload ip nat inside source route-map sovintel interface Serial1 overload ip classless ip route 0.0.0.0 0.0.0.0 Dialer1 ip route 0.0.0.0 0.0.0.0 Serial1 200 no ip http server ! access-list 1 permit 192.168.1.0 0.0.0.255 access-list 101 permit ip any 192.168.21.0 0.0.0.255 dialer-list 1 protocol ip permit route-map sovintel permit 10 match ip address 1 match interface Serial1 ! route-map comstar permit 10 match ip address 1 match interface Dialer1 ! snmp-server engineID local 00000009020000B0C289F181 snmp-server community public RO ! line con 0 exec-timeout 0 0 password 7 0645 login transport input none line aux 0 line vty 0 4 password 7 112A1016141D4A2C47 login transport input none ! end Cisco1720# _____________ Cisco1720#sho flash System flash directory: File  Length   Name/status   1   4519552  c1700-sy56i-mz.121-1.XC [4519616 bytes used, 3868992 available, 8388608 total] 8192K bytes of processor board System flash (Read/Write) Cisco1720# ip адреса изменены
		Рекомендовать в FAQ | Cообщить модератору | Наверх

	3. "Волнующие строки"
	Сообщение от A Clockwork Orange on 24-Окт-03, 17:30  (MSK)
	В чем может быть проблема Волка?
		Рекомендовать в FAQ | Cообщить модератору | Наверх

	4. "Волнующие строки"
	Сообщение от Volume on 24-Окт-03, 17:42  (MSK)
	все ip адреса и маски изменены при проведении съемок ни одна циска не пострадала
		Рекомендовать в FAQ | Cообщить модератору | Наверх

	5. "Волнующие строки"
	Сообщение от A Clockwork Orange on 24-Окт-03, 18:38  (MSK)
	И дальше то что? В чем ошибка?
		Рекомендовать в FAQ | Cообщить модератору | Наверх

	6. "Волнующие строки"
	Сообщение от A Clockwork Orange on 25-Окт-03, 08:00  (MSK)
	Неужели нет ответа? Я ведь загружал IOS как описано в инструкции. Xmodem Procedure for Downloading a Cisco IOS Software Image onto a Cisco 3600 Router Use the following xmodem procedure to download a Cisco IOS software image onto a Cisco 3600 Series Router. The standard procedure uses the default console speed of 9600 bits per second. Xmodem is a slow transfer protocol, and the transfer of a file as large as a Cisco IOS software image could take an unacceptably long time. Increasing the console speed on the 3600 router helps decrease the time it takes to do the xmodem file transfer. When in ROMMON mode, follow the procedure below using the ROMMON confreg utility. rommon 2 > confreg do you wish to change the configuration? y/n [n]:  y enable  "diagnostic mode"? y/n  [n]: n enable  "use net in IP bcast address"? y/n  [n]: n disable "load rom after netboot fails"? y/n  [n]: n enable  "use all zero broadcast"? y/n  [n]: n enable  "break/abort has effect"? y/n  [n]: n enable  "ignore system config info"? y/n  [n]: n change console baud rate? y/n  [n]:  y enter rate: 0 = 9600,  1 = 4800,  2 = 1200,  3 = 2400             4 = 19200, 5 = 38400, 6 = 57600, 7 = 115200  [7]:  7 change the boot characteristics? y/n  [n]:  y enter to boot: 0 = ROM Monitor 1 = the boot helper image 2-15 = boot system     [0]:  0     Configuration Summary enabled are: load rom after netboot fails console baud: 115200 boot: the ROM Monitor do you wish to change the configuration? y/n  [n]: n You must reset or power cycle for new config to take effect rommom 2 > reset Open a new hyperterminal with settings as follows: Bits per second - 115200 Data bits - 8 Parity - None Stop bits - 1 Flow control - Hardware After setting the hyperterminal, you get a rommon prompt. Enter the xmodem command. Before typing an xmodem command, there should be a software image residing in your terminal or your local hard drive. rommon 2 > xmodem -c c3640-i-mz.121-7.bin Do not start the sending program yet...          File size           Checksum   File name    4936800 bytes (0x4b5460)   0x2dd7    c3640-i-mz.121-7.bin (bad checksum: 0x13eb) WARNING: All existing data in flash will be lost! Invoke this application only for disaster recovery. Do you wish to continue? y/n  [n]:  y Ready to receive file c3640-i-mz.121-7.bin ... After the above message appears, you have to download the file using xmodem and the following procedure: Go to Hyperterminal and click the Transfer menu Select Send File In the dialog box which appears, click on browse; look for the file name on your local hard drive Below the filename field is the Protocol drop-down box; select Xmodem Click Send to initiate the file transfer After the transfer completes, the router will reload itself. When the reload completes, press the return key to be taken to a prompt and to reset the configuration register and the console line speed. Router> enable Router#configure terminal Enter configuration commands, one per line.  End with CNTL/Z. Router(config)#configure terminal Router(config)#config-register 0x2102 Router(config)#line con 0 Router(config-line)# speed 9600 Upon changing the console speed, you will lose connectivity. Go to your terminal program, change the baud rate to 9600, and reconnect to the router console. Router(config-line)#ctrl z Router #write mem Router #reload Для 1700 это аналогично все проходит
		Рекомендовать в FAQ | Cообщить модератору | Наверх

7. "Волнующие строки"
Сообщение от ВОЛКА on 25-Окт-03, 12:22  (MSK)
вообще - это нормальная загрузка, и беспокоиться не о чем...
	Рекомендовать в FAQ | Cообщить модератору | Наверх

	8. "Волнующие строки"
	Сообщение от A Clockwork Orange on 25-Окт-03, 20:23  (MSK)
	>вообще - это нормальная загрузка, и беспокоиться не о чем... Два раза писать одно и тоже, и еще какой то рестарт нормально?! 00:00:13: %SYS-5-CONFIG_I: Configured from memory by console 00:00:13: %SYS-5-RESTART: System restarted -- Cisco Internetwork Operating System Software IOS (tm) C1700 Software (C1700-SY56I-M), Version 12.1(1)XC, EARLY DEPLOYMENT REL EASE SOFTWARE (fc1) TAC:Home:SW:IOS:Specials for info Copyright (c) 1986-2000 by cisco Systems, Inc. Compiled Thu 23-Mar-00 15:45 by susingh Сначала в начале потом в процессе загурзи нормально Раньше такого не было
		Рекомендовать в FAQ | Cообщить модератору | Наверх

	9. "Волнующие строки"
	Сообщение от ВОЛКА on 26-Окт-03, 00:10  (MSK)
	нормально, подробности ищи на www.cisco.com
		Рекомендовать в FAQ | Cообщить модератору | Наверх

	10. "Волнующие строки"
	Сообщение от A Clockwork Orange on 26-Окт-03, 07:56  (MSK)
	>нормально, подробности ищи на www.cisco.com Пытаюсь уж четвертые сутки, если подскажешь буду балгодарен
		Рекомендовать в FAQ | Cообщить модератору | Наверх

Удалить

Индекс форумов | Темы | Пред. тема | След. тема

Пожалуйста, прежде чем написать сообщение, ознакомьтесь с данными рекомендациями.