Киска 3640 при копировании или создании любого файла просит erase :(
Флэшка на 16 метров, почти вся свободная
sh ver
------------------------------------------------------------------------
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3640-IO3-M), Version 12.1(3a)T1, RELEASE SOFTWARE (fc1
)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Sat 29-Jul-00 06:16 by ccai
Image text-base: 0x60008950, data-base: 0x609A4000
ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (f
c1)
Router uptime is 24 minutes
System returned to ROM by reload
System image file is "flash:aaa1194.bin"
cisco 3640 (R4700) processor (revision 0x00) with 27648K/5120K bytes of memory.
Processor board ID 29230083
R4700 CPU at 100Mhz, Implementation 33, Rev 1.0
MICA-6DM Firmware: CP ver 2310 - 6/3/1998, SP ver 2310 - 6/3/1998.
Bridging software.
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.1.
1 FastEthernet/IEEE 802.3 interface(s)
8 ISDN Basic Rate interface(s)
6 terminal line(s)
DRAM configuration is 64 bits wide with parity disabled.
125K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x3922
------------------------------------------------------------------------
причем еще одна особенность:
все файлы на флэшке или в nvram не имеют даты...
Например команда dir flash:
------------------------------------------------------------------------
Directory of flash:/
3 -rw- 5535120 <no date> aaa1194.bin
4 -rw- 24 <no date> system_env_vars
5 -rw- 29 <no date> env_vars
6 -rw- 802 <no date> config.text
------------------------------------------------------------------------
Подскажите местные гуру, что мне делать???