>
>Конфиги 7206 и 3550 покажите. А так же
>sh ip ospf
>sh ip ospf inter
>sh ip ospf neig
>
>с обоих
3550
!
interface FastEthernet0/10
description -=router porton 3550=-
no switchport
ip address 132.14.1.1 255.255.255.0
speed 10
duplex half
!
interface Vlan7
description -= to 7206 =-
ip address 120.0.1.1 255.255.255.252
ip summary-address eigrp 7 120.0.1.0 255.255.255.252 1
!
router eigrp 17
network 120.0.1.0 0.0.0.3
network 120.1.37.0 0.0.0.255
network 120.1.38.0 0.0.0.255
network 120.1.39.0 0.0.0.255
network 120.1.50.0 0.0.0.255
network 120.1.51.0 0.0.0.255
network 132.1.5.0 0.0.0.255
network 132.1.20.0 0.0.0.255
network 132.1.30.0 0.0.0.255
network 132.1.70.0 0.0.0.255
network 132.1.72.0 0.0.0.255
network 132.1.111.0 0.0.0.255
network 132.1.231.0 0.0.0.255
network 132.1.232.0 0.0.0.255
network 132.2.1.0 0.0.0.255
network 192.168.11.0
no auto-summary
no eigrp log-neighbor-changes
!
router ospf 100
log-adjacency-changes
redistribute connected subnets
network 120.0.1.0 0.0.0.3 area 0
network 132.1.41.0 0.0.0.255 area 0
network 132.14.1.0 0.0.0.255 area 0
!
3550#sh ip ospf
Routing Process "ospf 100" with ID 192.168.101.72
Supports only single TOS(TOS0) routes
Supports opaque LSA
It is an autonomous system boundary router
Redistributing External Routes from,
connected, includes subnets in redistribution
SPF schedule delay 5 secs, Hold time between two SPFs 10 secs
Minimum LSA interval 5 secs. Minimum LSA arrival 1 secs
Number of external LSA 42. Checksum Sum 0x12937B
Number of opaque AS LSA 0. Checksum Sum 0x000000
Number of DCbitless external and opaque AS LSA 0
Number of DoNotAge external and opaque AS LSA 0
Number of areas in this router is 1. 1 normal 0 stub 0 nssa
External flood list length 0
Area BACKBONE(0)
Number of interfaces in this area is 2
Area has no authentication
SPF algorithm executed 6 times
Area ranges are
Number of LSA 1. Checksum Sum 0x0010A1
Number of opaque link LSA 0. Checksum Sum 0x000000
Number of DCbitless LSA 0
Number of indication LSA 0
Number of DoNotAge LSA 0
Flood list length 0
3550#sh ip ospf neighbor
Neighbor ID Pri State Dead Time Address Interface
120.1.99.1 1 DOWN/DROTHER - 120.0.1.2 Vlan7
3550#sh ip ospf interface
Vlan7 is up, line protocol is up
Internet Address 120.0.1.1/30, Area 0
Process ID 100, Router ID 192.168.101.72, Network Type BROADCAST, Cost: 1
Transmit Delay is 1 sec, State DR, Priority 1
Designated Router (ID) 192.168.101.72, Interface address 120.0.1.1
Backup Designated router (ID) 120.1.99.1, Interface address 120.0.1.2
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:05
Index 1/1, flood queue length 0
Next 0x0(0)/0x0(0)
Last flood scan length is 0, maximum is 0
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 1, Adjacent neighbor count is 0
Suppress hello for 0 neighbor(s)
FastEthernet0/10 is up, line protocol is up (connected)
Internet Address 132.14.1.1/24, Area 0
Process ID 100, Router ID 192.168.101.72, Network Type BROADCAST, Cost: 10
Transmit Delay is 1 sec, State DR, Priority 1
Designated Router (ID) 192.168.101.72, Interface address 132.14.1.1
No backup designated router on this network
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:07
Index 2/2, flood queue length 0
Next 0x0(0)/0x0(0)
Last flood scan length is 0, maximum is 0
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 0, Adjacent neighbor count is 0
Suppress hello for 0 neighbor(s)
7206
!
interface GigabitEthernet0/1.7
description -=Link to 3550=-
encapsulation dot1Q 7
ip address 120.0.1.2 255.255.255.252
no cdp enable
!
interface Serial1/0:0
description -= 2650 =-
ip address 10.7.0.5 255.255.255.252
encapsulation ppp
no fair-queue
no cdp enable
!
interface Serial1/2:0
description -= 2650 =-
ip address 10.7.0.1 255.255.255.252
encapsulation ppp
no fair-queue
no cdp enable
!
router eigrp 7
network 10.0.0.0
network 120.0.0.0
no auto-summary
no eigrp log-neighbor-changes
!
router ospf 100
log-adjacency-changes
redistribute connected subnets
network 10.0.0.0 0.255.255.255 area 0
network 120.0.1.2 0.0.0.0 area 0
network 133.11.1.0 0.0.0.255 area 0
7206#sh ip ospf
Routing Process "ospf 100" with ID 120.1.99.1
Supports only single TOS(TOS0) routes
Supports opaque LSA
It is an autonomous system boundary router
Redistributing External Routes from,
connected, includes subnets in redistribution
SPF schedule delay 5 secs, Hold time between two SPFs 10 secs
Minimum LSA interval 5 secs. Minimum LSA arrival 1 secs
Number of external LSA 8. Checksum Sum 0x03C6E2
Number of opaque AS LSA 0. Checksum Sum 0x000000
Number of DCbitless external and opaque AS LSA 0
Number of DoNotAge external and opaque AS LSA 0
Number of areas in this router is 1. 1 normal 0 stub 0 nssa
External flood list length 0
Area BACKBONE(0)
Number of interfaces in this area is 14
Area has no authentication
SPF algorithm executed 23112 times
Area ranges are
Number of LSA 2. Checksum Sum 0x011B1D
Number of opaque link LSA 0. Checksum Sum 0x000000
Number of DCbitless LSA 0
Number of indication LSA 0
Number of DoNotAge LSA 0
Flood list length 0
7206#sh ip ospf neighbor
Neighbor ID Pri State Dead Time Address Interface
192.168.101.72 1 DOWN/DROTHER - 120.0.1.1 GigabitEtherne
t0/1.7
133.13.99.1 1 FULL/ - 00:00:37 10.7.0.6 Serial1/0:0
133.13.99.1 1 FULL/ - 00:00:35 10.7.0.2 Serial1/2:0
Kiev#sh ip ospf interface
GigabitEthernet0/1.7 is up, line protocol is up
Internet Address 120.0.1.2/30, Area 0
Process ID 100, Router ID 120.1.99.1, Network Type BROADCAST, Cost: 1
Transmit Delay is 1 sec, State BDR, Priority 1
Designated Router (ID) 192.168.101.72, Interface address 120.0.1.1
Backup Designated router (ID) 120.1.99.1, Interface address 120.0.1.2
Flush timer for old DR LSA due in 00:02:54
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:08
Index 1/1, flood queue length 0
Next 0x0(0)/0x0(0)
Last flood scan length is 0, maximum is 0
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 1, Adjacent neighbor count is 0
Suppress hello for 0 neighbor(s)
Serial1/0:0 is up, line protocol is up
Internet Address 10.7.0.5/30, Area 0
Process ID 100, Router ID 120.1.99.1, Network Type POINT_TO_POINT, Cost: 50
Transmit Delay is 1 sec, State POINT_TO_POINT,
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:06
Index 3/3, flood queue length 0
Next 0x0(0)/0x0(0)
Last flood scan length is 1, maximum is 8
Last flood scan time is 0 msec, maximum is 4 msec
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 133.13.99.1
Suppress hello for 0 neighbor(s)
Serial1/2:0 is up, line protocol is up
Internet Address 10.7.0.1/30, Area 0
Process ID 100, Router ID 120.1.99.1, Network Type POINT_TO_POINT, Cost: 50
Transmit Delay is 1 sec, State POINT_TO_POINT,
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:05
Index 4/4, flood queue length 0
Next 0x0(0)/0x0(0)
Last flood scan length is 1, maximum is 8
Last flood scan time is 0 msec, maximum is 12 msec
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 133.13.99.1
Suppress hello for 0 neighbor(s)
Вариант для распечатки
Маршрутизаторы CISCO и др. оборудование. (Public)
(??) on
09-Июн-05, 12:07 (MSK)
