# # Makefile for Vim on Unix vim:ts=8:sw=8:tw=78 # # This Makefile is loosely based on the GNU Makefile conventions found in # standards.info. # # Compiling Vim, summary: # # 3. make # 4. make install # # Compiling Vim, details: # # Edit this file for adjusting to your system. You should not need to edit any # other file for machine specific things! # The name of this file MUST be Makefile (note the uppercase 'M'). # # 1. Edit this Makefile # The defaults for Vim should work on most machines, but you may want to # uncomment some lines or make other changes below to tune it to your # system, compiler or preferences. # - If you want a version of Vim that is small and starts up quickly, you # might want to disable the GUI and X11: # - Put a # before the lines with --enable-gui if you have Motif and/or # Athena but don't want to make gvim (the GUI version of Vim with nice # menus and scrollbars, but makes Vim bigger and startup slower). # - Remove the # before the line "CONF_OPT_X = --without-x" if you have # X11 but want to disable using X11 libraries. Vim won't set the # window titles then. # - Uncomment one of CFLAGS and/or CC if you have something very special or # want to tune the optimizer. # - Search for the name of your system to see if it needs anything special. # - A few versions of make use '.include "file"' instead of 'include file'. # Adjust the include line below if yours does. # # 2. Edit feature.h # Only if you do not agree with the default compile features, e.g.: # - you want Vim to be as vi compatible as it can be # - you want to use Emacs tags files # - you want right-to-left editing (Hebrew) # - you want 'langmap' support (Greek) # - you want to remove features to make Vim smaller # # 3. "make" # Will first run ./configure with the options in this file. Then it will # start make again on this Makefile to do the compiling. You can also do # this in two steps with: # make config # make # The configuration phase creates/overwrites config.h and config.mk. # Configure is created with autoconf. It can detect different features of # your system and act accordingly. However, it is not correct for all # systems. Check this: # - If you have X windows, but configure could not find it or reported # another include/library directory then you wanted to use, you have to # set CONF_OPT_X below. You might also check the installation of xmkmf. # - If you have --enable-gui=motif and have Motif on your system, but # configure reports "checking for location of gui... ", you # have to set GUI_INC_LOC and GUI_LIB_LOC below. # If you changed something, do this to run configure again: # make distclean # make config # make # # - If you do not trust the automatic configuration code, then inspect # config.h and config.mk, before starting the actual build phase. If # possible edit this Makefile, rather than config.mk -- especially look # the definitions of VIM_HLP and SYS_VIMRC_FILE below. Note that the # configure phase overwrites config.mk and config.h again. # - If you get error messages, find out what is wrong and try to correct it # in this Makefile. You may need to do "make distclean" when you # change anything that configure uses (e.g. switching from an old C # compiler to an ANSI C compiler). Only when ./configure does something # wrong you may need to change one of the other files. If you find a # clean way to fix the problem, consider sending a note to the author of # autoconf (bug-gnu-utils@prep.ai.mit.edu) or Vim (mool@oce.nl). Don't # bother to do that when you made a hack solution for a non-standard # system. # # 4. "make install" # If the new Vim seems to be working OK you can install it and the # documentation in the appropriate location. The default is "/usr/local". # Change "PREFIX" below to change the location. "pathdef.c" will be # compiled again after changing this to make the executable know where the # help files are located. # Note that any existing executable and documentation is removed or # overwritten. If you want to keep it you will have to make a backup copy # first. ### This Makefile has been succesfully tested on these systems. ### Check the (*) column for remarks, listed below. ### Later code changes may cause small problems, otherwise Vim is supposed to ### compile and run without problems. #system: configurations: version (*) tested by: #------------- ------------------------ ------- - ---------- #AIX 3 cc gcc +X11 +GUI -GUI 4.0 Stephen Riehm #AIX 3.2.5 cc (not gcc) - 4.5 (M) Will Fiveash #AIX 4 cc +X11 -GUI 3.27 (4) Axel Kielhorn #AIX 4.0 gcc 2.7.2 +X11 -GUI 4.4 Axel Kielhorn #AIX_4.1 gcc +X11R6 -GUI 4.6c Karsten Sievert #AIX 4.1.4 cc +X11 +GUI 4.2 Joey Joosten #AIX 4.1.4 cc +X11 +GUI 4.5 (5) Nico Bakker #A/UX 3.1.1 gcc +X11 4.5 (6) Jim Jagielski #Alpha OSF1 cc gcc-2.6.3 +X11 +GUI 3.23 Robert Webb #Alpha OSF1 V3.2 cc +X11 3.22 Heiko Nardmann #Alpha OSF1 V4.0 gcc +GUI_Motif 4.6c Heiko Nardmann #Apollo cc -X11 -GUI 3.23 Robert Webb #BSDI 2.1 (x86) shlicc2 gcc-2.6.3 noX X11R6 4.5 (1) Jos Backus #BSD/OS 3.0 (x86) gcc gcc-2.7.2.1 noX X11R6 4.6c (1) Jos Backus #ConvexOS cc +X11 Motif Athena 3.29 Lennart Schultz #dynix/ptx 1.4.0 cc -X11 -GUI 3.21 Juergen Weigert #FreeBSD 2.0.5 gcc-2.6.3 X11R6 3.17 Bram Moolenaar #FreeBSD 2.1.6 gcc-2.6.3 X11R6 +Moo-Tiff 4.6b Bram Moolenaar #FreeBSD 2.1.6 gcc-2.6.3 +X11 -GUI +Athena 4.6b Bram Moolenaar #HP-UX 9.00 c89 cc X11R5 Motif 1.2 3.24 (2) Bram Moolenaar #HP-UX 9.01 (400) gcc 2.7.2 +X11 +Athena +Motif 4.4 Axel Kielhorn #HP-UX 9.01 (400) cc89 +X11 +Motif 1.2 3.27 Axel Kielhorn #HP-UX 9.01 (700) gcc +X11 +GUI 4.6b Mun Johl #HP-UX 9.01 (700) gcc 2.7.2 +X11 +Athena +Motif 4.4 Axel Kielhorn #HP-UX 9.01 (700) cc89 +X11 +Athena +Motif 3.27 Axel Kielhorn #HP-UX A.09.03U (SPP1000) gcc-2.5.8 +X11 Motif 3.29 Lennart Schultz #HP-UX 9.04E cc gcc-2.6.3 X11R5 Motif 1.2 4.3 Kayhan Demirel #HP-UX 9.05 gcc-2.7.2 +X11R6.1 Athena3d 4.4 L. Duperval #HP-UX 9.05 (700) cc gcc c89 X11R5 Motif 1.2 4.6b (Y) Bram Moolenaar #HP-UX_9.05 gcc +X11R6 +GUI Motif 4.6c Karsten Sievert #HP-UX 9.07 c89 X11R5 Motif 1.2 3.23 (Y) Nikhil Patel #HP-UX 10.01A cc gcc-2.6.3 X11R5 Motif 1.2 4.3 Kayhan Demirel #HP-UX 10.01 cc X11R6 -GUI 3.20 Jiwei Wang #HP-UX 10.01 cc -X11 -GUI 3.27 Juergen Weigert #HP-UX 10.10 c89 X11R5 Motif 1.2 3.23 (Z) Nikhil Patel #HP-UX 10.10 cc X11R5 Motif 1.2 4.0 Stephen Riehm #HP-UX_10.20 cc +X11R6 +GUI Motif 4.6b (Z) Karsten Sievert #HP-UX_10.20 gcc +X11R6 +GUI Motif 4.6c Karsten Sievert #HP SPP2000 HP-UX B.10.01 cc -X11 4.6b Lennart Schultz #Irix 5.2/5.3 cc gcc-2.6.3 +X11 +GUI 3.22 Robert Webb #Irix 5.3 cc -X11 -GUI 3.27 Juergen Weigert #Irix 5.3 cc gcc-2.7.2 +X11 +Motif 4.4 Ives Aerts #Irix-5.3 (IP22 mips) gcc-2.7.2 +X11 Motif Athena 3.29 Lennart Schultz #Irix 5.3 gcc-2.6.3 +X11 +GUI Motif 4.2 Eric Fischer #Irix 6.3 (O2) cc ? 4.5 (L) Edouard Poor #Irix 6.2 cc +X11 +GUI (Motif) 3.24 Bruce Templeton #Irix 64 bit 4.5 (K) Jon Wright #KSR OS R1.2.2 cc -X11 -GUI 3.21 Juergen Weigert #Linux/LST gcc +X11R6 +GUI=Athena 3.27 Juergen Weigert #Linux 1.2.13 (x86,ELF) gcc-2.7.2 +X11 +GUI Athena 4.1 Eric Fischer #Linux 1.2.13-ELF gcc-2.7.0 X11R6 +GUI 3.29 Tony Nugent #Linux 1.2.13 gcc-2.7.0 +X11 -GUI X11R6 3.25 Robert Colon #Linux 1.2.13-ELF gcc-2.7.0 -X11 -GUI 3.21 Juergen Weigert #Linux 1.3.3 #2 i586 gcc 2.6.3 +X11R6 +GUI 3.26 Renate Schmidt #Linux 1.3.73-ELF gcc-2.7.0 +X11 -GUI 3.22 Paul Slootman #Linux 1.3.94-ELF gcc-2.7.0 +X11 +GUI Athena 3.25 Paul Slootman #Linux 1.3.97-ELF gcc-2.7.2 +X11 +GUI Athena 3.26 Iva Cabric #Linux 1.3.98-ELF gcc-2.7.2 +X11 Athena Motif 3.27 Bill Foster #Linux 1.3.39 gcc-2.7.2 +X11R6 Athena3d 4.3 L. Duperval #Linux 1.99.7 gcc-2.7.0 +X11 Athena 3.29 Lennart Schultz #Linux 1.99.7 gcc-2.7.0 +X11 +GUI Athena 3.29 Paul Slootman #Linux 2.0 gcc-2.7.2 Infomagic Motif 4.3 (3) Ronald Rietman #Linux 2.0.10 gcc-2.7.0 +X11 +GUI Athena 4.4 Paul Slootman #Linux 2.0.22 gcc-2.7.2.1 +X11 +GUI Athena 4.5 Tony Nugent #Linux 2.0.28 (Alpha) gcc-2.7.2 +X11 +GUI Athena 4.6c Paul Slootman #Linux 2.0.29 gcc-2.7.0 +X11 +GUI Athena 4.6c Paul Slootman #mot88 R32V3 cc -X11 -GUI 3.21 Juergen Weigert #NCR Tower 32/450 SVR3 cc -X11 3.22 Paul Slootman #NCR Tower 32/450 SVR3 gcc-2.4.3 -X11 3.22 Paul Slootman #NEC UP4800 UNIX_SV 4.2MP cc +X11R6 Motif,Athena 4.6b (Q) Lennart Schultz #NetBSD 1.0A gcc-2.4.5 -X11 -GUI 3.21 (X) Juergen Weigert #NetBSD 1.1A gcc-2.7.2 +X11 +GUI Athena 3.27 Bill Foster #NetBSD 1.2 (i386) gcc-2.7.2 +X11 -GUI 4.6c Paul Slootman #NeXTstep 3.0 (68k) gcc-2.6.3 +X11 +GUI Athena 4.2 Eric Fischer #QNX 4.2 wcc386-10.6 noX 4.2 (D) G.F. Desrochers #QNX 4.23 Watcom -X11 4.2 (F) John Oleynick #SCO Unix 3.2 cc +X11 +Motif 4.4 (G) Darren Hiebert #SCO Unix 3.2v4.2 cc -X11 3.22 Paul Slootman #SCO Unix v3.2.5 cc +X11 Motif 3.27 (C) M. Kuperblum #SCO 4.0 level 3.2.4 -X11 3.19 Glauber #SCO Open Server 5 +X11 +GUI Motif 3.28 (A) J.C. van Winkel #Sequent/ptx V1.4.0 cc gcc-2.2.2 +X11R5 -GUI 3.27 Juergen Weigert #Sinix 5.41 (x86 SVR4) gcc-2.4.3 -X11 4.6c Paul Slootman #SNI Targon31 TOS 4.1.11 cc -X11 3.22 Paul Slootman #SNI Targon31 TOS 4.1.11 gcc-2.4.5 +X11 -GUI 4.6c (B) Paul Slootman #Solaris 2.3 (SunOS 5.3) gcc-2.6.3 X openwin 3.18 Aswin Kumar #Solaris 2.3 gcc +X11R5 +GUI Athena 4.5 Karsten Sievert #Solaris 2.4 (x86) gcc-2.6.0 -X11 3.29 Paul Slootman #Solaris 2.4 (x86) gcc-2.6.0 +X11 -GUI 3.25 Paul Slootman #Solaris 2.4 (x86) gcc-2.6.0 +X11 +GUI openwin 3.29 Paul Slootman #Solaris 2.5 (x86) gcc-2.6.0 +X11 +GUI Motif 4.4 Paul Slootman #Solaris 2.4 (sun4m) gcc-2.7.2 +X11 Motif Athena 3.29 Lennart Schultz #Solaris 2.4 (Sparc) cc +X11 +GUI 3.29 (9) Glauber #Solaris 2.4 sun4m gcc 2.7.2 +X11R6 Motif 4.4 L. Duperval #Solaris 2.4 sun4m gcc 2.7.2 +X11 -GUI 4.4 L. Duperval #Solaris 2.4 gcc-2.7.2 +X11 +GUI Motif 3.26 Iva Cabric #Solaris 2.4/2.5 clcc +X11 -GUI openwin 3.20 (7) Robert Colon #Solaris 2.4/2.5 cc (SUNWspro) +X11 -GUI openwin 3.25 Robert Colon #Solaris 2.5 cc -X11 -GUI 3.27 Juergen Weigert #Solaris 2.5 cc +X11=openwin +GUI=Motif 3.27 Juergen Weigert #Solaris 2.5 gcc-2.7.2 +X11 +GUI Motif 3.26 Iva Cabric #Solaris 2.5.1(sun4m) gcc 2.7.2.2.f.1+X11R6 +GUI 4.6a Renate Schmidt #Solaris 2.5 (sun4m) gcc-2.7.2 +X11R6 +GUI (CDE) 4.6b Andrew Large #Solaris 2.5 (sun4m) cc (SC4.0) +X11R6 +GUI (CDE) 4.6b (E) Andrew Large #Solaris 2.5 (sun4u) gcc-2.7.2 +X11 Motif Athena 3.29 Lennart Schultz #Solaris 2.5 cc +X11 +GUI Athena 4.2 (9) Sonia Heimann #Solaris 2.5.1 gcc +X11R6 +GUI Motif 4.6c Karsten Sievert #Solaris 2.5.1 (sun4m) gcc (2.7.2.1) +GUI_Motif +X11R6 4.6c J.M. Felderhoff #Solaris 2.5.1 (x86) gcc-2.7.2 -X11 4.6c Paul Slootman #SunOS 4.1.1 gcc 2.7.2 +X11 -GUI 4.0 (J) L. Duperval #SunOS 4.1.1 (sun4c) cc -X11 3.29 (J) Lennart Schultz #SunOS 4.1.2 (sun4c) cc -X11 3.29 (J) Lennart Schultz #SunOS 4.1.2 (sun4) gcc 2.7.2 +X11R6 -GUI 4.1 (J) Renate Schmidt #SunOS 4.1.3 (sun4c) cc -X11 3.29 (J) Lennart Schultz #SunOs 4.1.3/4 cc +X11 -GUI openwin 3.25 (J) Robert Colon #SunOS 4.1.3 cc gcc-2.7.0 -X11 -GUI 3.27 (J) Juergen Weigert #SunOS 4.1.3 cc gcc-2.7.0 +X11R5 +GUI=Athena 3.27 (J) Juergen Weigert #SunOS 4.1.3 (sun4c) gcc (2.7.2.1) +GUI_Motif +X11R6 4.6c J.M. Felderhoff #SunOS 4.1.4 cc gcc-2.6.3 +X11 +GUI 3.23 (J) Robert Webb #SunOS 4.1.4 (sun4c) gcc-2.7.2 +X11 Athena 3.29 (J) Lennart Schultz #SunOS 4.1.3/4 gcc +X11R5 +GUI Athena 4.5 (J) Karsten Sievert #SunOS_4.1.3 acc -GUI 4.6b Karsten Sievert #SunOS 4.1.3 gcc +X11R6 +GUI Athena 4.6c Karsten Sievert #SUPER-UX 6.2 (NEC SX-4) cc +X11R6 Motif,Athena 4.6b (P) Lennart Schultz #Ultrix cc -X11 +X11 4.3 Bram Moolenaar #Ultrix 4.2 cc -X11 +X11 4.4 (H) Darren Hiebert #Unisys 6035 cc X11 Motif 3.29 (8) Glauber #UnixWare 4.2 cc gcc-2.6.3 X11 3.19 Robert Webb #UnixWare cc +X11 -GUI 3.23 Robert Webb #UnixWare cc +X11R5 +GUI Motif 3.23 Thanh Ma #UnixWare cc +X11R5 +GUI Athena 3.24 Thanh Ma # (*) Remarks: # # (1) Uncomment line below for shlicc2 # (2) Needs c89 on a 400 system, uncomment line below # (3) Infomagic Motif needs GUI_LIB_LOC and GUI_INC_LOC set, see below. # And add "-lXpm" to GUI_LIBS. # (4) For cc the optimizer must be disabled (use CFLAGS= after running # configure) (symptom: ":set termcap" output looks weird). # (5) Compiler may need -qmaxmem argument, see below. # (6) See below for a few lines to uncomment # (7) See below for lines which enable the use of clcc # (8) Needs some EXTRA_LIBS, search for Unisys below # (9) Needs an extra compiler flag to compile gui_at_sb.c, see below. # (A) needs EXTRA_LIB, see below # (B) Can't compile GUI because there is no waitpid()... Disable GUI below. # (C) Force the use of curses instead of termcap, see below. # (D) Uncomment lines below for QNX # (E) You might want to use termlib instead of termcap, see below. # (F) See below for instructions. # (G) See line for GUI_LIBS below. # (H) Need to compile normal.c without optimizer, otherwise compiler hangs. # (J) If you get undefined symbols, see below for a solution. # (K) See lines to uncomment below for machines with 64 bit pointers. # (L) For Silicon Graphics O2 workstations remove "-lnsl" from config.mk # (M) gcc version cygnus-2.0.1 does NOT work (symptom: "dl" deletes two # characters instead of one). # (P) For SuperUX 6.2 on NEC SX-4 see a few lines below to uncomment. # (Q) For UNIXSVR 4.2MP on NEC UP4800 see below for lines to uncomment. # (X) Need to use the .include "config.mk" line below # (Y) See line with c89 below # (Z) See lines with cc or c89 below #DO NOT CHANGE the next line, we need it for configure to find the compiler #instead of using the default from the "make" program. #Use a line further down to change the value for CC. CC= # Change and use these defines if configure cannot find your Motif stuff. # Unfortunately there is no "standard" location for Motif. # These defines can contain a single directory (recommended) or a list of # directories (for when you are working with several systems). The LAST # directory that exists is used. # When changed, run "make distclean" next! #GUI_INC_LOC = /usr/include/Motif2.0 /usr/include/Motif1.2 #GUI_LIB_LOC = /usr/lib/Motif2.0 /usr/lib/Motif1.2 ### Use these two lines for Infomagic Motif (3) #GUI_INC_LOC = /usr/X11R6/include #GUI_LIB_LOC = /usr/X11R6/lib ######################## config.mk ######################## # At this position config.mk is included. When starting from the # distribution it is almost empty. After running ./configure it contains # settings that have been discovered for your system. Settings below this # include override settings in config.mk! # (X) How to include config.mk depends on the version of "make" you have, if # the current choice doesn't work, try the other one. include config.mk #.include "config.mk" # Include the configuration choices first, so we can override everything # below. As shipped, this file contains a target that causes to run # configure. Once configure was run, this file contains a list of # make variables with predefined values instead. Thus any second invocation # of make, will buid Vim. # You can give a lot of options to configure. # Change this to your desire and do 'make config' afterwards ### For creating Vim with GUI (gvim) # Comment these all out when you don't want to get the GUI version, although # you have Motif and/or Athena. (B) # When using "yes" configure will use Motif if it can be found, otherwise use # Athena when it can be found. # If the Motif and Athena files are not found, GUI is disabled automatically CONF_OPT_GUI = --enable-gui=yes #CONF_OPT_GUI = --enable-gui=motif #CONF_OPT_GUI = --enable-gui=athena ### For creating a plain Vim without any X11 related fancies use this one: ### (otherwise Vim configure will try to include xterm titlebar access) ### Also disable the GUI above, otherwise it will be included anyway. ### When both GUI and X11 have been disabled this may save about 15% of the ### code and make Vim startup quicker. #CONF_OPT_X = --without-x ### If you have multiple X11 derivates installed, you may wish to specify ### which one to use. This here selects openwin (as found on sun). ### Select nothing to let configure choose. #XROOT = /usr/openwin #CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib ### COMPILER -- the default from configure will mostly be fine, no need to ### change this, just an example. If a compiler is defined here, configure ### will use it rather than probing for one. It is dangerous to change this ### after configure was run. Make will use your choice then -- but beware: ### Many things may change with another compiler. It is wise to run 'make ### distclean' and start all over again. #CC = cc #CC = gcc ### ### COMPILER FLAGS - change as you please. Either before running configure ### or afterwards. For examples see below. ### Linux: When using -g, you will probably get a statically linked ### executable!! ### When not defined, configure will try to use -O2 -g for gcc and -O for cc. #CFLAGS = -g #CFLAGS = -O #CFLAGS = -g -O2 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes ### Often used for GCC: optimizing, lot of optimizing, debugging #CFLAGS = -O2 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes #CFLAGS = -O6 -fno-strength-reduce -Wall -Wshadow -Wmissing-prototypes #CFLAGS = -g -DDEBUG -Wall -Wshadow -Wmissing-prototypes ##################################################### ### Specific systems, check if yours is listed! ### ##################################################### ### Uncomment things here only if the values chosen by configure are wrong. ### It's better to adjust configure.in and run autoconf, if you can! ### Then send the required changes to configure.in to the bugs list. ### (1) BSD/OS 2.0.1, 2.1 or 3.0 using shared libraries ### #CC = shlicc2 #CFLAGS = -O2 -g -m486 -Wall -Wshadow -Wmissing-prototypes -fno-builtin ### (2) HP-UX 9.01 on a 400 workstation with a cc that complains about space ### (Y) HP-UX 9.07 with the ANSI compiler #CC = c89 -D_INCLUDE_HPUX_SOURCE -D_INCLUDE_XOPEN_SOURCE -D_INCLUDE_POSIX_SOURCE ### (Z) HP-UX 10.10 with the ANSI compiler ### Will you gues at HP finally decide which options should be used?!?! #CC = c89 -D_INCLUDE_HPUX_SOURCE -D_INCLUDE_XOPEN_SOURCE -D_INCLUDE_XOPEN_SOURCE_EXTENDED ### (Z) HP-UX 10.20 with the ANSI compiler ### Both of these lines probably work the same. ### Maybe this works for all HP-UX 9.xx and 10.xx systems? #CC = cc -Aa -D_HPUX_SOURCE #CC = c89 -D_HPUX_SOURCE ### For HP-UX: Disable the use of a different set of digraphs (when ### _INCLUDE_HPUX_SOURCE is defined), or force the use of a different set ### of digraphs). Uncomment ONE of these lines. After changing this do ### "touch digraph.c; make". #EXTRA_DEFS = -DNO_HPUX_DIGRAPHS #EXTRA_DEFS = -DHPUX_DIGRAPHS ### (5) AIX 4.1.4 with cc #CFLAGS = -O -qmaxmem=8092 ### (7) Solaris 2.4/2.5 with Centerline compiler #CC = clcc #X_LIBS_DIR = -L/usr/openwin/lib -R/usr/openwin/lib #CFLAGS = -O ### (8) Unisys 6035 (use the first with GUI, the second without) #EXTRA_LIBS = -lsocket -lgen #EXTRA_LIBS = -lnsl -lsocket -lgen ### (9) Solaris 2.x with cc (SunPro), using Athena. ### Only required for compiling gui_at_sb.c. ### Symptom: "identifier redeclared: vim_XawScrollbarSetThumb" ### Use one of the lines (either Full ANSI or no ANSI at all) #CFLAGS = $(CFLAGS) -Xc #CFLAGS = $(CFLAGS) -Xs ### When builtin functions cause problems with gcc (for Sun 4.1.x) #CFLAGS = -O2 -Wall -traditional -Wno-implicit ### Apollo DOMAIN (with SYSTYPE = bsd4.3) (TESTED for version 3.0) #EXTRA_DEFS = -DDOMAIN #CFLAGS= -O -A systype,bsd4.3 ### Irix 4.0 & 5.2 (Silicon Graphics Machines, __sgi will be defined) # Not needed for Irix 5.3, Ives Aerts reported #EXTRA_LIBS = -lmalloc -lc_s ### Coherent 4.2.10 on Intel 386 platform #EXTRA_DEFS = -Dvoid=int #EXTRA_LIBS = -lterm -lsocket ### SCO 3.2, with different library name for terminfo #EXTRA_LIBS = -ltinfo ### Solaris 2.3 with X11 and specific cc #CC=/opt/SUNWspro/bin/cc -O -Xa -v -R/usr/openwin/lib ### UTS2 for Amdahl UTS 2.1.x #EXTRA_DEFS = -DUTS2 #EXTRA_LIBS = -lsocket ### UTS4 for Amdahl UTS 4.x #EXTRA_DEFS = -DUTS4 -Xa ### USL for Unix Systems Laboratories (SYSV 4.2) #EXTRA_DEFS = -DUSL ### RISCos on MIPS without X11 #EXTRA_DEFS = -DMIPS ### RISCos on MIPS with X11 #EXTRA_LIBS = -lsun ### (6) A/UX 3.1.1 with gcc (Jim Jagielski) #CC= gcc -D_POSIX_SOURCE #CFLAGS= -O2 #EXTRA_LIBS = -lposix -lbsd -ltermcap -lX11 ### (A) SCO Open Server 5 (Jan Christiaan van Winkel) ### Also use the TERM_LIB below! #EXTRA_LIBS = -lgen ### (D) QNX (by G.F. Desrochers) ### Also change "STRIP = strip" into "STRIP = echo" below #CFLAGS = -g -O -mf -4 ### (F) QNX (by John Oleynick) # 1. If you don't have an X server: Comment out CONF_OPT_GUI and uncomment # CONF_OPT_X = --without-x. # 2. make config # 3. edit config.mk and remove -ldir and -ltermcap from LIBS. It doesn't # have -ldir (does config find it somewhere?) and -ltermcap has at # least one problem so I use termlib.o instead. The problem with # termcap is that it segfaults if you call it with the name of # a non-existent terminal type. # 4. edit config.h and add #define USE_TMPNAM # 5. add termlib.o to OBJ # 6. make ### (K) for SGI Irix machines with 64 bit pointers ("uname -s" says IRIX64) ### suggested by Jon Wright ### tested on R8000 IRIX6.1 Power Indigo2 # either (for 64 bit pointers) uncomment the following line #GUI_LIB_LOC = /usr/lib64 # then # 1) make config # 2) edit config.mk and delete the -lelf entry in the LIBS line # 3) make # # or (for 32bit pointers) uncomment the following line #EXTRA_DEFS = -n32 #GUI_LIB_LOC = /usr/lib32 # then # 1) make config # 2) edit config.mk, add -n32 to LDFLAGS # 3) make ### ### (P) SuperUX 6.2 on NEC SX-4 (Lennart Schultz) #GUI_INC_LOC = /usr/include #GUI_LIB_LOC = /usr/lib #EXTRA_LIBS = -lgen ### (Q) UNIXSVR 4.2MP on NEC UP4800 (Lennart Schultz) #GUI_INC_LOC = /usr/necccs/include #GUI_LIB_LOC = /usr/necccs/lib/X11R6 #XROOT = /usr/necccs #CONF_OPT_X = --x-include=$(XROOT)/include --x-libraries=$(XROOT)/lib/X11R6 #EXTRA_LIBS = -lsocket -lgen ### (C) On SCO Unix v3.2.5 (and probably other versions) the termcap library, ### which is found by configure, doesn't work correctly. Symptom is the ### error message "Termcap entry too long". Uncomment the next line. ### after changing this, you need to do "make distclean; make". #TERM_LIB = -lcurses ### (E) If you want to use termlib library instead of the automatically found ### one. After changing this, you need to do "make distclean; make". #TERM_LIB = -ltermlib ### If you want to use ncurses library instead of the automatically found one ### after changing this, you need to do "make distclean; make". #TERM_LIB = -lncurses ##################### end of system specific lines ################### ### Name of target(s) TARGET = vim GTARGET = gvim ### Names of the tools that are also made TOOLS = ctags/ctags xxd/xxd ### Installation directory. Default from configure is "/usr/local". ### EXEC_PREFIX is for the executable, PREFIX is for other files (they may be ### different when using different architectures for the executable and a ### common directory for the other files). ### ### Uncomment the next two lines to install in your home directory. #PREFIX = $(HOME) #EXEC_PREFIX = $(HOME) ### Uncomment the next line only if the value of PREFIX is different from ### EXEC_PREFIX #PREFIX_MKDIR = $(PREFIX) ### Location of executable BINLOC = $(EXEC_PREFIX)/bin ### Location of man page MANLOC = $(PREFIX)/man MANDIR = /man1 ### Location of help files and system global vimrc ### The default for HELPDIR comes from configure: "/share" or "/lib" #HELPDIR = /lib HELPSUBDIR = /vim HELPLOC = $(PREFIX)$(HELPDIR) HELPSUBLOC = $(HELPLOC)$(HELPSUBDIR) ### These go into pathdef.c VIM_HLP = $(HELPSUBLOC)/vim_help.txt SYS_VIMRC_FILE = $(HELPSUBLOC)/vimrc SYS_GVIMRC_FILE = $(HELPSUBLOC)/gvimrc ### Program to run on installed binary STRIP = strip ### Permissions for vim binary BINMOD = 755 ### Permissions for man page MANMOD = 644 ### Permissions for help files HELPMOD = 644 ### Permissions for bin/man/help directories that are created DIRMOD = 755 # Where to copy the man and help files from HELPSOURCE = ../doc # If you are using Linux, you might want to use this to make vim the # default vi editor, it will create a link from vi to Vim when doing # "make install". #LINKIT = -ln -f -s $(BINLOC)/$(TARGET) /usr/bin/vi ### ### GRAPHICAL USER INTERFACE (GUI). ### 'configure --enable-gui' can enable one of these for you if you did set ### a corresponding CONF_OPT_GUI above and have X11. ### Override configures choice by uncommenting one of the following lines (The ### first is an explicit enable, the second is an explicit disable): # MOTIF_COMMENT = # MOTIF_COMMENT = ZZZ # Some NeXT system's make cannot handle this, you will get a syntax error. # Use gmake instead or put a # in front of the lines starting with '$'. ### Motif GUI interface. $(MOTIF_COMMENT)GUI_INCL = gui.h $(MOTIF_COMMENT)GUI_SRC = gui.c gui_motif.c gui_x11.c pty.c $(MOTIF_COMMENT)GUI_OBJ = gui.o gui_motif.o gui_x11.o pty.o $(MOTIF_COMMENT)GUI_DEFS = -DUSE_GUI_MOTIF $(NARROW_PROTO) $(MOTIF_COMMENT)GUI_IPATH = -I$(GUI_INC_LOC) $(MOTIF_COMMENT)GUI_LIBS_DIR = -L$(GUI_LIB_LOC) $(MOTIF_COMMENT)GUI_LIBS = -lXm -lXt $(MOTIF_COMMENT)LINKGVIM = -rm -f $(BINLOC)/$(GTARGET); cd $(BINLOC); ln -s $(TARGET) $(GTARGET) #For SunOS (Solaris) you might want to use this line: #$(MOTIF_COMMENT)GUI_LIBS_DIR = -L$(GUI_LIB_LOC) -R$(GUI_LIB_LOC) # (G) If you get an unreferenced symbol "_XEditResCheckMessages": #$(MOTIF_COMMENT)GUI_LIBS = -lXm -lXt -lXmu # ATHENA_COMMENT = # ATHENA_COMMENT = ZZZ ### Athena Widget GUI interface. ### Use Xaw3d if you have it, makes the menus looks nicer #XAW_LIB = -lXaw3d XAW_LIB = -lXaw $(ATHENA_COMMENT)GUI_INCL = gui.h $(ATHENA_COMMENT)GUI_SRC = gui.c gui_athena.c gui_x11.c pty.c gui_at_sb.c $(ATHENA_COMMENT)GUI_OBJ = gui.o gui_athena.o gui_x11.o pty.o gui_at_sb.o $(ATHENA_COMMENT)GUI_DEFS = -DUSE_GUI_ATHENA $(NARROW_PROTO) $(ATHENA_COMMENT)GUI_IPATH = -I$(GUI_INC_LOC) $(ATHENA_COMMENT)GUI_LIBS_DIR = -L$(GUI_LIB_LOC) $(ATHENA_COMMENT)GUI_LIBS = $(XAW_LIB) -lXt -lXmu $(ATHENA_COMMENT)LINKGVIM = -rm -f $(BINLOC)/$(GTARGET); cd $(BINLOC); ln -s $(TARGET) $(GTARGET) ### (J) Sun OpenWindows 3.2 (SunOS 4.1.x) or earlier that produce these ld # errors: ld: Undefined symbol # _get_wmShellWidgetClass # _get_applicationShellWidgetClass # then you need to get patches 100512-02 and 100573-03 from Sun. In the # meantime, uncomment the following GUI_LIBS definition as a workaround: #GUI_LIBS = -lXaw -Bstatic -lXmu -Bdynamic -lXt # GUI files used for making ctags ALL_GUI_INCL = gui.h gui_at_sb.h ALL_GUI_SRC = gui.c gui_motif.c gui_x11.c gui_athena.c gui_at_sb.c ALL_GUI_PRO = gui.pro gui_motif.pro gui_athena.pro gui_x11.pro ### our grand parent directory should know who we are... ### only used for "make tar" VIMVERSION = `eval "basename \`cd ../; pwd\`"` ### Command to create dependencies based on #include "..." ### prototype headers are ignored due to -DPROTO, system ### headers #include <...> are ignored if we use the -MM option, as ### e.g. provided by gcc-cpp. ### Include USE_GUI to get gependency on gui.h CPP_DEPEND = $(CC) -M$(CPP_MM) -DPROTO -DUSE_GUI $(DEFS) $(GUI_DEFS) $(EXTRA_DEFS) $(GUI_IPATH) $(X_CFLAGS) # flags for cproto # __inline and __attribute__ are not recognized by cproto # maybe the "/usr/bin/cc -E" has to be adjusted for some systems NO_ATTR = -D__inline= -D"__attribute__\\(x\\)=" # This is for cproto 3.5 patchlevel 3: # PROTO_FLAGS = -f4 -m__PARMS -d -E"$(CPP)" $(NO_ATTR) # # Use this for cproto 3 patchlevel 6 or below (use "cproto -V" to check): # PROTO_FLAGS = -f4 -m__PARMS -d -E"$(CPP)" $(NO_ATTR) # # Use this for cproto 3 patchlevel 7 or above (use "cproto -V" to check): PROTO_FLAGS = -m -M__PARMS -d -E"$(CPP)" $(NO_ATTR) ################################################ ## no changes required below this line ## ################################################ SHELL = /bin/sh .SUFFIXES: .SUFFIXES: .c .o .pro ALL_CFLAGS = $(DEFS) $(GUI_DEFS) $(EXTRA_DEFS) $(GUI_IPATH) $(CFLAGS) $(X_CFLAGS) ALL_LIBS = $(GUI_LIBS_DIR) $(X_LIBS_DIR) $(GUI_LIBS) $(X_PRE_LIBS) $(GUI_X_LIBS) $(X_LIBS) $(X_EXTRA_LIBS) $(LIBS) $(EXTRA_LIBS) PFLAGS = $(PROTO_FLAGS) -DPROTO $(DEFS) $(GUI_DEFS) $(EXTRA_DEFS) $(GUI_IPATH) $(X_CFLAGS) # BASIC_INCL and BASIC_SRC: files that are always used # GUI_INCL and GUI_SRC: extra GUI files for current configuration # ALL_GUI_INCL and ALL_GUI_SRC: all GUI files # # INCL and SRC: files used for current configuration # ALL_INCL: files used for make depend and ctags # ALL_SRC: files used for make depend BASIC_INCL = vim.h globals.h option.h keymap.h macros.h ascii.h term.h unix.h \ unixunix.h structs.h proto.h osdef.h config.h INCL = $(BASIC_INCL) $(GUI_INCL) ALL_INCL = $(BASIC_INCL) $(ALL_GUI_INCL) BASIC_SRC = alloc.c buffer.c charset.c \ cmdcmds.c cmdline.c csearch.c \ digraph.c edit.c fileio.c getchar.c \ help.c linefunc.c main.c mark.c \ memfile.c memline.c message.c \ misccmds.c normal.c ops.c option.c \ pathdef.c quickfix.c regexp.c regsub.c screen.c \ search.c tables.c tag.c term.c \ undo.c unix.c version.c window.c SRC = $(BASIC_SRC) $(GUI_SRC) ALL_SRC = $(BASIC_SRC) $(ALL_GUI_SRC) OBJ = alloc.o unix.o buffer.o charset.o \ cmdcmds.o cmdline.o csearch.o \ digraph.o edit.o fileio.o getchar.o \ help.o linefunc.o main.o mark.o \ memfile.o memline.o message.o \ misccmds.o normal.o ops.o option.o \ pathdef.o quickfix.o regexp.o regsub.o screen.o \ search.o tables.o tag.o term.o \ undo.o window.o $(GUI_OBJ) PRO_AUTO = unix.pro $(ALL_GUI_PRO) \ alloc.pro buffer.pro charset.pro cmdcmds.pro \ cmdline.pro csearch.pro digraph.pro edit.pro \ fileio.pro getchar.pro help.pro linefunc.pro \ main.pro mark.pro memfile.pro memline.pro \ message.pro misccmds.pro normal.pro ops.pro \ option.pro quickfix.pro regexp.pro regsub.pro \ screen.pro search.pro tables.pro tag.pro \ term.pro termlib.pro undo.pro version.pro window.pro PRO_MANUAL = amiga.pro msdos.pro win32.pro # Default target is making the executable all: $(TARGET) $(TOOLS) # Run ./configure with all the setting above. config: configure GUI_INC_LOC="$(GUI_INC_LOC)" GUI_LIB_LOC="$(GUI_LIB_LOC)" \ CC="$(CC)" CFLAGS="$(CFLAGS)" TERM_LIB="$(TERM_LIB)" \ $(CONF_SHELL) ./configure $(CONF_OPT_GUI) $(CONF_OPT_X) # When configure.in has changed, run autoconf to produce configure # If you don't have autoconf, use the configure that's there configure: configure.in autoconf # Fix a bug in autoconf 2.8 and 2.9 (not needed for 2.10, which we use now): # mv -f configure configure.wrong # sed -e 's+$$ac_cv_lib_dnet+$$ac_cv_lib_$$ac_lib_var+' configure.wrong > configure # rm -f configure.wrong chmod 755 configure # Re-execute this Makefile to include the new config.mk produced by configure # Only used when typing "make" with a fresh config.mk. myself: $(MAKE) -f Makefile all # Link the target for normal use $(TARGET): $(OBJ) version.c version.h $(CC) -c $(ALL_CFLAGS) version.c $(CC) $(LDFLAGS) -o $(TARGET) $(OBJ) version.o $(ALL_LIBS) # Link the target for debugging debug: $(OBJ) version.c version.h $(CC) -c $(ALL_CFLAGS) version.c $(CC) $(LDFLAGS) -o $(TARGET) -g $(OBJ) version.o $(ALL_LIBS) ctags/ctags: ctags/ctags.c cd ctags; CC="$(CC)" CFLAGS="$(CFLAGS)" $(MAKE) -f Makefile.unix xxd/xxd: xxd/xxd.c cd xxd; CC="$(CC)" CFLAGS="$(CFLAGS)" $(MAKE) -f Makefile.unix # Generate function prototypes. This is not needed to compile vim, but if # you want to use it, cproto is out there on the net somewhere -- Webb # # When generating amiga.pro, msdos.pro and win32.pro there will be a few # include files that can not be found, that's OK. proto: $(PRO_AUTO) $(PRO_MANUAL) ### Would be nice if this would work for "normal" make. ### Currently it only works for (Free)BSD make. #$(PRO_AUTO): $$(*F).c # cproto $(PFLAGS) -DUSE_GUI $(*F).c > $@ # Always define USE_GUI. This will generate a few warnings if it's also # defined in config.h, you can ignore that. .c.pro: cproto $(PFLAGS) -DUSE_GUI $< > proto/$@ amiga.pro: amiga.c cproto $(PFLAGS) -DAMIGA -UHAVE_CONFIG_H -DBPTR=char* amiga.c > proto/amiga.pro msdos.pro: msdos.c cproto $(PFLAGS) -DMSDOS -UHAVE_CONFIG_H msdos.c > proto/msdos.pro win32.pro: win32.c cproto $(PFLAGS) -DWIN32 -UHAVE_CONFIG_H win32.c > proto/win32.pro notags: rm -f tags # Note: tags is made for the currently configured version, can't include both # Motif and Athena GUI ctags tags TAGS: notags $(CTAGS) $(SRC) $(ALL_INCL) # # Avoid overwriting an existing executable, somebody might be running it and # overwriting it could cause it to crash. Deleting it is OK, it won't be # really deleted until all running processes for it have exited. It is # renamed first, in case the deleting doesn't work. # # If you want to keep an older version, rename it before running "make # install". # install: $(TARGET) $(TOOLS) $(EXEC_PREFIX) $(BINLOC) $(PREFIX) $(MANLOC) $(MANLOC)$(MANDIR) $(HELPLOC) $(HELPSUBLOC) -mv -f $(BINLOC)/$(TARGET) $(BINLOC)/$(TARGET).old -rm -f $(BINLOC)/$(TARGET).old cp $(TARGET) $(BINLOC) $(STRIP) $(BINLOC)/$(TARGET) chmod $(BINMOD) $(BINLOC)/$(TARGET) -$(LINKIT) -$(LINKGVIM) sed -e s+/usr/local/lib/vim+$(HELPSUBLOC)+ $(HELPSOURCE)/vim.1 > $(MANLOC)$(MANDIR)/vim.1 chmod $(MANMOD) $(MANLOC)$(MANDIR)/vim.1 cp $(HELPSOURCE)/vim_*.txt $(HELPSUBLOC) cp $(HELPSOURCE)/vim_tags $(HELPSUBLOC) chmod $(HELPMOD) $(HELPSUBLOC)/vim_*.txt $(HELPSUBLOC)/vim_tags cp ctags/ctags $(BINLOC) $(STRIP) $(BINLOC)/ctags chmod $(BINMOD) $(BINLOC)/ctags cp $(HELPSOURCE)/ctags.1 $(MANLOC)$(MANDIR) chmod $(MANMOD) $(MANLOC)$(MANDIR)/ctags.1 cp xxd/xxd $(BINLOC) $(STRIP) $(BINLOC)/xxd chmod $(BINMOD) $(BINLOC)/xxd cp $(HELPSOURCE)/xxd.1 $(MANLOC)$(MANDIR) chmod $(MANMOD) $(MANLOC)$(MANDIR)/xxd.1 $(EXEC_PREFIX) $(BINLOC) $(PREFIX_MKDIR) $(MANLOC) $(MANLOC)$(MANDIR) $(HELPLOC) $(HELPSUBLOC): -mkdir $@ -chmod $(DIRMOD) $@ uninstall: rm -f $(BINLOC)/$(TARGET) $(MANLOC)$(MANDIR)/vim.1 rm -f $(HELPSUBLOC)/vim_*.txt $(HELPSUBLOC)/vim_tags # Clean up all the files that have been produced, except configure's # We support common typing mistakes for Juergen! :-) clean celan: -rm -f *.o core vim.core $(TARGET) xxd/*.o ctags/*.o $(TOOLS) -rm -f osdef.h pathdef.c mkcmdtab cmdtab.h conftest* *~ shadow: doc mkdir shadow cd shadow; ln -s ../*.[ch] ../*.in ../*.sh ../toolcheck ../proto ../*.tab ../configure . cd shadow; rm -f osdef.h config.h cmdtab.h pathdef.c cp Makefile shadow echo "the first targets to make vim are: scratch config myself" > shadow/config.mk mkdir shadow/ctags cd shadow/ctags; ln -s ../../ctags/*.[ch] ../../ctags/Make* . mkdir shadow/xxd cd shadow/xxd; ln -s ../../xxd/*.[ch] ../../xxd/Make* . doc: ln -s ../doc . # Start configure from scratch scrub scratch: rm -f config.status config.cache config.h config.log distclean: scratch clean echo "the first targets to make vim are: scratch config myself" > config.mk tar: clean echo packing $(VIMVERSION) ... VIMVERSION=$(VIMVERSION); cd ../..; set -x; \ tar cvf $$VIMVERSION.tar $$VIMVERSION; \ gzip -nf $$VIMVERSION.tar || gzip -f $$VIMVERSION.tar dist: distclean tar check: mdepend: -@rm -f Makefile~ cp Makefile Makefile~ sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make @for i in $(ALL_SRC) ; do \ echo "$$i" ; \ echo `echo "$$i" | sed -e 's/.c$$/.o/'`": $$i" `\ $(CPP) $$i |\ grep '^# .*"\./.*\.h"' |\ sort -t'"' -u +1 -2 |\ sed -e 's/.*"\.\/\(.*\)".*/\1/'\ ` >> tmp_make ; \ done mv tmp_make Makefile depend: -@rm -f Makefile~ cp Makefile Makefile~ sed -e '/\#\#\# Dependencies/q' < Makefile > tmp_make -for i in $(ALL_SRC); do echo $$i; \ $(CPP_DEPEND) $$i >> tmp_make; done mv tmp_make Makefile # use this in case the files have been transported via an MSDOS system FILES = *.c *.h Makefile *.in makefile.* *.sh cmdtab.tab proto/*.pro tags configure dos2unix: -mv arp_prot.h arp_proto.h -mv makefile.arc makefile.arch -mv makefile.dic makefile.dice -mv makefile.man makefile.manx -mv makefile Makefile -mv config_h.in config.h.in || mv configxh.in config.h.in || mv configh.in config.h.in -mv config_m.in config.mk.in || mv configxm.in config.mk.in || mv configmk.in config.mk.in -mv osdef1_h.in osdef1.h.in || mv osdef1xh.in osdef1.h.in || mv osdef1h.in osdef1.h.in -mv osdef2_h.in osdef2.h.in || mv osdef2xh.in osdef2.h.in || mv osdef2h.in osdef2.h.in -mv configur.in configure.in -mv configur configure -mv gui_moti.c gui_motif.c -mv gui_athe.c gui_athena.c -mv gui_at_s.c gui_at_sb.c -mv gui_at_s.h gui_at_sb.h for i in $(FILES); do tr -d '\r\032' < $$i > ~tmp~; mv ~tmp~ $$i; echo $$i; done ########################################################################### # Used when .o files are in src directory .c.o: $(CC) -c -I$(srcdir) $(ALL_CFLAGS) $< # Used when .o files are in src/objects directory #$(OBJ): $$(*F).c # $(CC) -c -I$(srcdir) $(ALL_CFLAGS) $(*F).c -o $@ osdef.h: osdef.sh config.h osdef1.h.in osdef2.h.in CC="$(CC) $(ALL_CFLAGS)" srcdir=${srcdir} sh $(srcdir)/osdef.sh pathdef.c: Makefile config.mk -@echo creating pathdef.c -@echo '/* pathdef.c -- DO NOT EDIT! */' > pathdef.c -@echo '/* This file is automatically created by Makefile' >> pathdef.c -@echo ' * Change the Makefile only. */' >> pathdef.c -@echo '#include "vim.h"' >> pathdef.c -@echo '#ifndef SYS_VIMRC_FILE' >> pathdef.c -@echo 'char_u *sys_vimrc_fname = (char_u *)"$(SYS_VIMRC_FILE)";' >> pathdef.c -@echo '#else' >> pathdef.c -@echo 'char_u *sys_vimrc_fname = (char_u *)SYS_VIMRC_FILE;' >> pathdef.c -@echo '#endif' >> pathdef.c -@echo '#ifndef SYS_GVIMRC_FILE' >> pathdef.c -@echo 'char_u *sys_gvimrc_fname = (char_u *)"$(SYS_GVIMRC_FILE)";' >> pathdef.c -@echo '#else' >> pathdef.c -@echo 'char_u *sys_gvimrc_fname = (char_u *)SYS_GVIMRC_FILE;' >> pathdef.c -@echo '#endif' >> pathdef.c -@echo '#ifndef VIM_HLP' >> pathdef.c -@echo 'char_u *help_fname = (char_u *)"$(VIM_HLP)";' >> pathdef.c -@echo '#else' >> pathdef.c -@echo 'char_u *help_fname = (char_u *)VIM_HLP;' >> pathdef.c -@echo '#endif' >> pathdef.c -@echo 'char_u *all_cflags = (char_u *)"$(CC) -c -I$(srcdir) $(ALL_CFLAGS)";' >> pathdef.c Makefile: @echo The name of the makefile MUST be "Makefile" (with capital M)!!!! cmdtab.h: cmdtab.tab mkcmdtab ./mkcmdtab cmdtab.tab cmdtab.h mkcmdtab: mkcmdtab.c osdef.h $(CC) -I$(srcdir) $(ALL_CFLAGS) -o mkcmdtab mkcmdtab.c ############################################################################### ### (automatically generated by 'make depend') ### Dependencies: alloc.o: alloc.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \ macros.h structs.h gui.h globals.h proto.h regexp.h buffer.o: buffer.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \ macros.h structs.h gui.h globals.h proto.h regexp.h option.h charset.o: charset.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h \ term.h macros.h structs.h gui.h globals.h proto.h regexp.h option.h cmdcmds.o: cmdcmds.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h \ term.h macros.h structs.h gui.h globals.h proto.h regexp.h option.h cmdline.o: cmdline.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h \ term.h macros.h structs.h gui.h globals.h proto.h regexp.h option.h cmdtab.h \ ops.h csearch.o: csearch.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h \ term.h macros.h structs.h gui.h globals.h proto.h regexp.h option.h digraph.o: digraph.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h \ term.h macros.h structs.h gui.h globals.h proto.h regexp.h option.h edit.o: edit.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \ macros.h structs.h gui.h globals.h proto.h regexp.h option.h ops.h fileio.o: fileio.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \ macros.h structs.h gui.h globals.h proto.h regexp.h option.h getchar.o: getchar.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h \ term.h macros.h structs.h gui.h globals.h proto.h regexp.h option.h help.o: help.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \ macros.h structs.h gui.h globals.h proto.h regexp.h option.h linefunc.o: linefunc.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h \ term.h macros.h structs.h gui.h globals.h proto.h regexp.h main.o: main.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \ macros.h structs.h gui.h globals.h proto.h regexp.h option.h mark.o: mark.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \ macros.h structs.h gui.h globals.h proto.h regexp.h option.h memfile.o: memfile.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h \ term.h macros.h structs.h gui.h globals.h proto.h regexp.h option.h memline.o: memline.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h \ term.h macros.h structs.h gui.h globals.h proto.h regexp.h option.h message.o: message.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h \ term.h macros.h structs.h gui.h globals.h proto.h regexp.h option.h misccmds.o: misccmds.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h \ term.h macros.h structs.h gui.h globals.h proto.h regexp.h option.h normal.o: normal.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \ macros.h structs.h gui.h globals.h proto.h regexp.h option.h ops.h ops.o: ops.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \ macros.h structs.h gui.h globals.h proto.h regexp.h option.h ops.h option.o: option.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \ macros.h structs.h gui.h globals.h proto.h regexp.h option.h pathdef.o: pathdef.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h \ term.h macros.h structs.h gui.h quickfix.o: quickfix.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h \ term.h macros.h structs.h gui.h globals.h proto.h regexp.h option.h regexp.o: regexp.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \ macros.h structs.h gui.h globals.h proto.h regexp.h option.h regsub.o: regsub.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \ macros.h structs.h gui.h globals.h proto.h regexp.h screen.o: screen.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \ macros.h structs.h gui.h globals.h proto.h regexp.h option.h ops.h search.o: search.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \ macros.h structs.h gui.h globals.h proto.h regexp.h option.h ops.h tables.o: tables.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \ macros.h structs.h gui.h globals.h proto.h regexp.h option.h tag.o: tag.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \ macros.h structs.h gui.h globals.h proto.h regexp.h option.h term.o: term.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \ macros.h structs.h gui.h globals.h option.h proto.h regexp.h undo.o: undo.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \ macros.h structs.h gui.h globals.h proto.h regexp.h option.h unix.o: unix.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \ macros.h structs.h gui.h globals.h option.h proto.h regexp.h unixunix.h version.o: version.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h \ term.h macros.h structs.h gui.h globals.h proto.h regexp.h version.h window.o: window.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \ macros.h structs.h gui.h globals.h proto.h regexp.h option.h gui.o: gui.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h term.h \ macros.h structs.h gui.h globals.h proto.h regexp.h option.h gui_motif.o: gui_motif.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h \ term.h macros.h structs.h gui.h globals.h proto.h regexp.h option.h ops.h gui_x11.o: gui_x11.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h \ term.h macros.h structs.h gui.h globals.h proto.h regexp.h option.h ops.h gui_athena.o: gui_athena.c vim.h config.h feature.h unix.h osdef.h ascii.h \ keymap.h term.h macros.h structs.h gui.h globals.h proto.h regexp.h option.h \ ops.h gui_at_sb.h gui_at_sb.o: gui_at_sb.c vim.h config.h feature.h unix.h osdef.h ascii.h keymap.h \ term.h macros.h structs.h gui.h gui_at_sb.h