The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

cupsd.conf (5)
  • >> cupsd.conf (5) ( Разные man: Форматы файлов )
  •  

    NAME

    cupsd.conf - server configuration file for cups
     
    

    DESCRIPTION

    The cupsd.conf file configures the CUPS scheduler, cupsd(8). It is normally located in the /etc/cups directory.

    Each line in the file can be a configuration directive, a blank line, or a comment. Comment lines start with the # character. The configuration directives are intentionally similar to those used by the popular Apache web server software and are described below.  

    DIRECTIVES

    The following directives are understood by cupsd(8). Consult the on-line help for detailed descriptions:
    AccessLog filename
    AccessLog syslog

    Defines the access log filename.
    Allow all
    Allow none
    Allow host.domain.com
    Allow *.domain.com
    Allow ip-address
    Allow ip-address/netmask
    Allow ip-address/mm
    Allow @IF(name)
    Allow @LOCAL

    Allows access from the named hosts or addresses.
    AuthClass User
    AuthClass Group
    AuthClass System

    Specifies the authentication class (User, Group, System) - this directive is deprecated.
    AuthGroupName group-name

    Specifies the authentication group - this directive is deprecated.
    AuthType None
    AuthType Basic
    AuthType BasicDigest
    AuthType Digest
    AuthType Kerberos

    Specifies the authentication type (None, Basic, BasicDigest, Digest, Kerberos)
    AutoPurgeJobs Yes
    AutoPurgeJobs No

    Specifies whether to purge job history data automatically when it is no longer required for quotas.
    BrowseAddress ip-address
    BrowseAddress @IF(name)
    BrowseAddress @LOCAL

    Specifies a broadcast address for outgoing printer information packets.
    BrowseAllow all
    BrowseAllow none
    BrowseAllow host.domain.com
    BrowseAllow *.domain.com
    BrowseAllow ip-address
    BrowseAllow ip-address/netmask
    BrowseAllow ip-address/mm
    BrowseAllow @IF(name)
    BrowseAllow @LOCAL

    Allows incoming printer information packets from the named host or address.
    BrowseDeny all
    BrowseDeny none
    BrowseDeny host.domain.com
    BrowseDeny *.domain.com
    BrowseDeny ip-address
    BrowseDeny ip-address/netmask
    BrowseDeny ip-address/mm
    BrowseDeny @IF(name)
    BrowseDeny @LOCAL

    Denies incoming printer information packets from the named host or address.
    BrowseInterval seconds

    Specifies the maximum interval between printer information broadcasts.
    BrowseOrder allow,deny
    BrowseOrder deny,allow

    Specifies the order of printer information access control (allow,deny or deny,allow)
    BrowsePoll host-or-ip-address

    Specifies a server to poll for printer information.
    BrowsePort port

    Specifies the port to listen to for printer information packets.
    BrowseProtocols [All] [CUPS] [DNSSD] [LDAP] [SLP]

    Specifies the protocols to use for printer browsing.
    BrowseLocalProtocols [All] [CUPS] [DNSSD] [LDAP] [SLP]

    Specifies the protocols to use for local printer browsing.
    BrowseRemoteProtocols [All] [CUPS] [DNSSD] [LDAP] [SLP]

    Specifies the protocols to use for remote printer browsing.
    BrowseRelay from-address to-address

    Specifies that printer information packets should be relayed from one host or network to another.
    BrowseShortNames Yes
    BrowseShortNames No

    Specifies whether remote printers will use short names ("printer") or not ("printer@server"). This option is ignored if more than one remote printer exists with the same name.
    BrowseTimeout seconds

    Specifies the maximum interval between printer information updates before remote printers will be removed from the list of available printers.
    Browsing Yes
    Browsing No

    Specifies whether or not remote printer browsing should be enabled.
    Classification banner

    Specifies the security classification of the server.
    ClassifyOverride Yes
    ClassifyOverride No

    Specifies whether to allow users to override the classification of individual print jobs.
    ConfigFilePerm mode

    Specifies the permissions for all configuration files that the scheduler writes.
    DataDir path

    Specified the directory where data files can be found.
    DefaultAuthType Basic
    DefaultAuthType BasicDigest
    DefaultAuthType Digest
    DefaultAuthType Kerberos

    Specifies the default type of authentication to use.
    DefaultCharset charset

    Specifies the default character set to use for text.
    DefaultLanguage locale

    Specifies the default language to use for text and web content.
    DefaultPolicy policy-name

    Specifies the default access policy to use.
    Deny all
    Deny none
    Deny host.domain.com
    Deny *.domain.com
    Deny ip-address
    Deny ip-address/netmask
    Deny ip-address/mm
    Deny @IF(name)
    Deny @LOCAL

    Denies access to the named host or address.
    DocumentRoot directory

    Specifies the root directory for the internal web server documents.
    Encryption IfRequested
    Encryption Never
    Encryption Required

    Specifies the level of encryption that is required for a particular location.
    ErrorLog filename
    ErrorLog syslog

    Specifies the error log filename.
    FileDevice Yes
    FileDevice No

    Specifies whether the file pseudo-device can be used for new printer queues.
    FilterLimit limit

    Specifies the maximum cost of filters that are run concurrently.
    FilterNice nice-value

    Specifies the scheduling priority ("nice" value) of filters that are run to print a job.
    FontPath directory[:directory:...]

    Specifies the search path for fonts.
    Group group-name-or-number

    Specifies the group name or ID that will be used when executing external programs.
    HideImplicitMembers Yes
    HideImplicitMembers No

    Specifies whether to hide members of implicit classes.
    HostNameLookups Yes
    HostNameLookups No
    HostNameLookups Double

    Specifies whether or not to do reverse lookups on client addresses.
    ImplicitAnyClasses Yes
    ImplicitAnyClasses No

    Specifies whether or not to create implicit classes for local and remote printers, e.g. "AnyPrinter" from "Printer", "Printer@server1", and "Printer@server2".
    ImplicitClasses Yes
    ImplicitClasses No

    Specifies whether or not to create implicit classes from identical remote printers.
    Include filename

    Includes the named file.
    JobRetryInterval seconds

    Specifies the interval between retries of jobs in seconds.
    JobRetryLimit count

    Specifies the number of retries that are done for jobs.
    KeepAlive Yes
    KeepAlive No

    Specifies whether to support HTTP keep-alive connections.
    KeepAliveTimeout seconds

    Specifies the amount of time that connections are kept alive.
    Krb5Keytab filename

    Overrides the Kerberos key tab location.
    <Limit operations> ... </Limit>

    Specifies the IPP operations that are being limited inside a policy.
    <Limit methods> ... </Limit>
    <LimitExcept methods> ... </LimitExcept>

    Specifies the HTTP methods that are being limited inside a location.
    LimitRequestBody

    Specifies the maximum size of any print job request.
    Listen ip-address:port
    Listen *:port
    Listen /path/to/domain/socket

    Listens to the specified address and port or domain socket path.
    <Location /path> ... </Location>

    Specifies access control for the named location.
    LogFilePerm mode

    Specifies the permissions for all log files that the scheduler writes.
    LogLevel alert
    LogLevel crit
    LogLevel debug2
    LogLevel debug
    LogLevel emerg
    LogLevel error
    LogLevel info
    LogLevel none
    LogLevel notice
    LogLevel warn

    Specifies the logging level for the ErrorLog file.
    MaxClients number

    Specifies the maximum number of simultaneous clients to support.
    MaxClientsPerHost number

    Specifies the maximum number of simultaneous clients to support from a single address.
    MaxCopies number

    Specifies the maximum number of copies that a user can print of each job.
    MaxJobs number

    Specifies the maximum number of simultaneous jobs to support.
    MaxJobsPerPrinter number

    Specifies the maximum number of simultaneous jobs per printer to support.
    MaxJobsPerUser number

    Specifies the maximum number of simultaneous jobs per user to support.
    MaxLogSize number-bytes

    Specifies the maximum size of the log files before they are rotated (0 to disable rotation)
    MaxRequestSize number-bytes

    Specifies the maximum request/file size in bytes (0 for no limit)
    Order allow,deny
    Order deny,allow

    Specifies the order of HTTP access control (allow,deny or deny,allow)
    PageLog filename
    PageLog syslog

    Specifies the page log filename.
    PassEnv variable [... variable]

    Passes the specified environment variable(s) to child processes.
    <Policy name> ... </Policy>

    Specifies access control for the named policy.
    Port number

    Specifies a port number to listen to for HTTP requests.
    PreserveJobFiles Yes
    PreserveJobFiles No

    Specifies whether or not to preserve job files after they are printed.
    PreserveJobHistory Yes
    PreserveJobHistory No

    Specifies whether or not to preserve the job history after they are printed.
    Printcap
    Printcap filename

    Specifies the filename for a printcap file that is updated automatically with a list of available printers (needed for legacy applications); specifying Printcap with no filename disables printcap generation.
    PrintcapFormat bsd
    PrintcapFormat solaris

    Specifies the format of the printcap file.
    PrintcapGUI
    PrintcapGUI gui-program-filename

    Specifies whether to generate option panel definition files on some operating systems. When provided with no program filename, disables option panel definition files.
    ReloadTimeout seconds

    Specifies the amount of time to wait for job completion before restarting the scheduler.
    RemoteRoot user-name

    Specifies the username that is associated with unauthenticated root accesses.
    RequestRoot directory

    Specifies the directory to store print jobs and other HTTP request data.
    Require group group-name-list
    Require user user-name-list
    Require valid-user

    Specifies that user or group authentication is required.
    RIPCache bytes

    Specifies the maximum amount of memory to use when converting images and PostScript files to bitmaps for a printer.
    Satisfy all
    Satisfy any

    Specifies whether all or any limits set for a Location must be satisfied to allow access.
    ServerAdmin [email protected]

    Specifies the email address of the server administrator.
    ServerBin directory

    Specifies the directory where backends, CGIs, daemons, and filters may be found.
    ServerCertificate filename

    Specifies the encryption certificate to use.
    ServerKey filename

    Specifies the encryption key to use.
    ServerName hostname-or-ip-address

    Specifies the fully-qualified hostname of the server.
    ServerRoot directory

    Specifies the directory where the server configuration files can be found.
    ServerTokens Full
    ServerTokens Major
    ServerTokens Minimal
    ServerTokens Minor
    ServerTokens None
    ServerTokens OS
    ServerTokens ProductOnly

    Specifies what information is included in the Server header of HTTP responses.
    SetEnv variable value

    Set the specified environment variable to be passed to child processes.
    SSLListen

    Listens on the specified address and port for encrypted connections.
    SSLPort

    Listens on the specified port for encrypted connections.
    SystemGroup group-name [group-name ...]

    Specifies the group(s) to use for System class authentication.
    TempDir directory

    Specifies the directory where temporary files are stored.
    Timeout seconds

    Specifies the HTTP request timeout in seconds.
    User user-name

    Specifies the user name or ID that is used when running external programs.
     

    SEE ALSO

    classes.conf(5), cupsd(8), mime.convs(5), mime.types(5), printers.conf(5), subscriptions.conf(5),
    http://localhost:631/help  

    COPYRIGHT

    Copyright 2007 by Apple Inc.


     

    Index

    NAME
    DESCRIPTION
    DIRECTIVES
    SEE ALSO
    COPYRIGHT


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру