The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

ldap_table (5)
  • >> ldap_table (5) ( Разные man: Форматы файлов )
  •  

    NAME

    ldap_table
    -
    Postfix LDAP client configuration
     
    

    SYNOPSIS

    postmap -q "string" ldap:/etc/postfix/filename
    
    postmap -q - ldap:/etc/postfix/filename <inputfile
    
     

    DESCRIPTION

    The Postfix mail system uses optional tables for address rewriting or mail routing. These tables are usually in dbm or db format.

    Alternatively, lookup tables can be specified as LDAP databases.

    In order to use LDAP lookups, define an LDAP source as a lookup table in main.cf, for example:
         alias_maps = ldap:/etc/postfix/ldap-aliases.cf

    The file /etc/postfix/ldap-aliases.cf has the same format as the Postfix main.cf file, and can specify the parameters described below. An example is given at the end of this manual.

    This configuration method is available with Postfix version 2.1 and later. See the section "BACKWARDS COMPATIBILITY" below for older Postfix versions.

    For details about LDAP SSL and STARTTLS, see the section on SSL and STARTTLS below.  

    BACKWARDS COMPATIBILITY

    
    
    For backwards compatibility with Postfix version 2.0 and earlier,
    LDAP parameters can also be defined in main.cf.  Specify
    as LDAP source a name that doesn't begin with a slash or
    a dot.  The LDAP parameters will then be accessible as the
    name you've given the source in its definition, an underscore,
    and the name of the parameter.  For example, if the map is
    specified as "ldap:ldapsource", the "server_host"
    parameter below would be defined in main.cf as
    "ldapsource_server_host".
    

    Note: with this form, the passwords for the LDAP sources are written in main.cf, which is normally world-readable. Support for this form will be removed in a future Postfix version.

    Postfix 2.2 has enhanced query interfaces for MySQL and PostgreSQL. These include features that were previously available only in the Postfix LDAP client. This work also created an opportunity for improvements in the LDAP interface. The primary compatibility issue is that result_filter (a name that has caused some confusion as to its meaning in the past) has been renamed to result_format. For backwards compatibility with the pre 2.2 LDAP client, result_filter can for now be used instead of result_format, when the latter parameter is not also set. The new name better reflects the function of the parameter. This compatibility interface may be removed in a future release.  

    LIST MEMBERSHIP

    
    
    When using LDAP to store lists such as $mynetworks,
    $mydestination, $relay_domains, $local_recipient_maps,
    etc., it is important to understand that the table must
    store each list member as a separate key. The table lookup
    verifies the *existence* of the key. See "Postfix lists
    versus tables" in the DATABASE_README document for a
    discussion.
    

    Do NOT create tables that return the full list of domains in $mydestination or $relay_domains etc., or IP addresses in $mynetworks.

    DO create tables with each matching item as a key and with an arbitrary value. With LDAP databases it is not uncommon to return the key itself.

    For example, NEVER do this in a map defining $mydestination: query_filter = domain=*
    result_attribute = domain

    Do this instead: query_filter = domain=%s
    result_attribute = domain  

    GENERAL LDAP PARAMETERS

    
    
    In the text below, default values are given in parentheses.
    Note: don't use quotes in these variables; at least, not until the
    Postfix configuration routines understand how to deal with quoted
    strings.
    
    server_host (default: localhost)
    The name of the host running the LDAP server, e.g.
         server_host = ldap.example.com

    Depending on the LDAP client library you're using, it should be possible to specify multiple servers here, with the library trying them in order should the first one fail. It should also be possible to give each server in the list a different port (overriding server_port below), by naming them like
         server_host = ldap.example.com:1444

    With OpenLDAP, a (list of) LDAP URLs can be used to specify both the hostname(s) and the port(s):
         server_host = ldap://ldap.example.com:1444
            
            ldap://ldap2.example.com:1444

    All LDAP URLs accepted by the OpenLDAP library are supported, including connections over UNIX domain sockets, and LDAP SSL (the last one provided that OpenLDAP was compiled with support for SSL):
         server_host = ldapi://%2Fsome%2Fpath
            
            ldaps://ldap.example.com:636

    server_port (default: 389)
    The port the LDAP server listens on, e.g.
         server_port = 778
    timeout (default: 10 seconds)
    The number of seconds a search can take before timing out, e.g.
         timeout = 5
    search_base (No default; you must configure this)
    The RFC2253 base DN at which to conduct the search, e.g.
         search_base = dc=your, dc=com
    With Postfix 2.2 and later this parameter supports the following '%' expansions:
    %%
    This is replaced by a literal '%' character.
    %s
    This is replaced by the input key. RFC 2253 quoting is used to make sure that the input key does not add unexpected metacharacters.
    %u
    When the input key is an address of the form user@domain, %u is replaced by the (RFC 2253) quoted local part of the address. Otherwise, %u is replaced by the entire search string. If the localpart is empty, the search is suppressed and returns no results.
    %d
    When the input key is an address of the form user@domain, %d is replaced by the (RFC 2253) quoted domain part of the address. Otherwise, the search is suppressed and returns no results.
    %[SUD]
    For the search_base parameter, the upper-case equivalents of the above expansions behave identically to their lower-case counter-parts. With the result_format parameter (previously called result_filter see the COMPATIBILITY section and below), they expand to the corresponding components of input key rather than the result value.
    %[1-9]
    The patterns %1, %2, ... %9 are replaced by the corresponding most significant component of the input key's domain. If the input key is [email protected], then %1 is com, %2 is example and %3 is mail. If the input key is unqualified or does not have enough domain components to satisfy all the specified patterns, the search is suppressed and returns no results.
    query_filter (default: mailacceptinggeneralid=%s)
    The RFC2254 filter used to search the directory, where %s is a substitute for the address Postfix is trying to resolve, e.g.
         query_filter = (&(mail=%s)(paid_up=true))

    This parameter supports the following '%' expansions:

    %%
    This is replaced by a literal '%' character. (Postfix 2.2 and later).
    %s
    This is replaced by the input key. RFC 2254 quoting is used to make sure that the input key does not add unexpected metacharacters.
    %u
    When the input key is an address of the form user@domain, %u is replaced by the (RFC 2254) quoted local part of the address. Otherwise, %u is replaced by the entire search string. If the localpart is empty, the search is suppressed and returns no results.
    %d
    When the input key is an address of the form user@domain, %d is replaced by the (RFC 2254) quoted domain part of the address. Otherwise, the search is suppressed and returns no results.
    %[SUD]
    The upper-case equivalents of the above expansions behave in the query_filter parameter identically to their lower-case counter-parts. With the result_format parameter (previously called result_filter see the COMPATIBILITY section and below), they expand to the corresponding components of input key rather than the result value.
    The above %S, %U and %D expansions are available with Postfix 2.2 and later.
    %[1-9]
    The patterns %1, %2, ... %9 are replaced by the corresponding most significant component of the input key's domain. If the input key is [email protected], then %1 is com, %2 is example and %3 is mail. If the input key is unqualified or does not have enough domain components to satisfy all the specified patterns, the saerch is suppressed and returns no results.
    The above %1, ..., %9 expansions are available with Postfix 2.2 and later.
    The "domain" parameter described below limits the input keys to addresses in matching domains. When the "domain" parameter is non-empty, LDAP queries for unqualified addresses or addresses in non-matching domains are suppressed and return no results.

    NOTE: DO NOT put quotes around the query_filter parameter.

    result_format (default: %s)
    Called result_filter in Postfix releases prior to 2.2. Format template applied to result attributes. Most commonly used to append (or prepend) text to the result. This parameter supports the following '%' expansions:
    %%
    This is replaced by a literal '%' character. (Postfix 2.2 and later).
    %s
    This is replaced by the value of the result attribute. When result is empty it is skipped.
    %u
    When the result attribute value is an address of the form user@domain, %u is replaced by the local part of the address. When the result has an empty localpart it is skipped.
    %d
    When a result attribute value is an address of the form user@domain, %d is replaced by the domain part of the attribute value. When the result is unqualified it is skipped.
    %[SUD1-9]
    The upper-case and decimal digit expansions interpolate the parts of the input key rather than the result. Their behavior is identical to that described with query_filter, and in fact because the input key is known in advance, lookups whose key does not contain all the information specified in the result template are suppressed and return no results.
    The above %S, %U, %D and %1, ..., %9 expansions are available with Postfix 2.2 and later.
    For example, using "result_format = smtp:[%s]" allows one to use a mailHost attribute as the basis of a transport(5) table. After applying the result format, multiple values are concatenated as comma separated strings. The expansion_limit and size_limit parameters explained below allow one to restrict the number of values in the result, which is especially useful for maps that should return a single value.

    The default value %s specifies that each attribute value should be used as is.

    This parameter was called result_filter in Postfix releases prior to 2.2. If no "result_format" is specified, the value of "result_filter" will be used instead before resorting to the default value. This provides compatibility with old configuration files.

    NOTE: DO NOT put quotes around the result format!

    domain (default: no domain list)
    This is a list of domain names, paths to files, or dictionaries. When specified, only fully qualified search keys with a *non-empty* localpart and a matching domain are eligible for lookup: 'user' lookups, bare domain lookups and "@domain" lookups are not performed. This can significantly reduce the query load on the LDAP server.
         domain = postfix.org, hash:/etc/postfix/searchdomains

    It is best not to use LDAP to store the domains eligible for LDAP lookups.

    NOTE: DO NOT define this parameter for local(8) aliases.

    This feature is available in Postfix 1.0 and later.

    result_attribute (default: maildrop)
    The attribute(s) Postfix will read from any directory entries returned by the lookup, to be resolved to an email address.
         result_attribute = mailbox, maildrop
    special_result_attribute (No default)
    The attribute(s) of directory entries that can contain DNs or URLs. If found, a recursive subsequent search is done using their values.
         special_result_attribute = member

    DN recursion retrieves the same result_attributes as the main query, including the special attributes for further recursion. URI processing retrieves only those attributes that are included in the URI definition and are *also* listed in "result_attribute". If the URI lists any of the map's special result attributes, these are also retrieved and used recursively.

    scope (default: sub)
    The LDAP search scope: sub, base, or one. These translate into LDAP_SCOPE_SUBTREE, LDAP_SCOPE_BASE, and LDAP_SCOPE_ONELEVEL.
    bind (default: yes)
    Whether or not to bind to the LDAP server. Newer LDAP implementations don't require clients to bind, which saves time. Example:
         bind = no

    If you do need to bind, you might consider configuring Postfix to connect to the local machine on a port that's an SSL tunnel to your LDAP server. If your LDAP server doesn't natively support SSL, put a tunnel (wrapper, proxy, whatever you want to call it) on that system too. This should prevent the password from traversing the network in the clear.

    bind_dn (default: empty)
    If you do have to bind, do it with this distinguished name. Example:
         bind_dn = uid=postfix, dc=your, dc=com
    bind_pw (default: empty)
    The password for the distinguished name above. If you have to use this, you probably want to make the map configuration file readable only by the Postfix user. When using the obsolete ldap:ldapsource syntax, with map parameters in main.cf, it is not possible to securely store the bind password. This is because main.cf needs to be world readable to allow local accounts to submit mail via the sendmail command. Example:
         bind_pw = postfixpw
    cache (IGNORED with a warning)
    cache_expiry (IGNORED with a warning)
    cache_size (IGNORED with a warning)
    The above parameters are NO LONGER SUPPORTED by Postfix. Cache support has been dropped from OpenLDAP as of release 2.1.13.
    recursion_limit (default: 1000)
    A limit on the nesting depth of DN and URL special result attribute evaluation. The limit must be a non-zero positive number.
    expansion_limit (default: 0)
    A limit on the total number of result elements returned (as a comma separated list) by a lookup against the map. A setting of zero disables the limit. Lookups fail with a temporary error if the limit is exceeded. Setting the limit to 1 ensures that lookups do not return multiple values.
    size_limit (default: $expansion_limit)
    A limit on the number of LDAP entries returned by any single LDAP search performed as part of the lookup. A setting of 0 disables the limit. Expansion of DN and URL references involves nested LDAP queries, each of which is separately subjected to this limit.

    Note: even a single LDAP entry can generate multiple lookup results, via multiple result attributes and/or multi-valued result attributes. This limit caps the per search resource utilization on the LDAP server, not the final multiplicity of the lookup result. It is analogous to the "-z" option of "ldapsearch".

    dereference (default: 0)
    When to dereference LDAP aliases. (Note that this has nothing do with Postfix aliases.) The permitted values are those legal for the OpenLDAP/UM LDAP implementations:
    0
    never
    1
    when searching
    2
    when locating the base object for the search
    3
    always
    See ldap.h or the ldap_open(3) or ldapsearch(1) man pages for more information. And if you're using an LDAP package that has other possible values, please bring it to the attention of the [email protected] mailing list.
    chase_referrals (default: 0)
    Sets (or clears) LDAP_OPT_REFERRALS (requires LDAP version 3 support).
    version (default: 2)
    Specifies the LDAP protocol version to use.
    debuglevel (default: 0)
    What level to set for debugging in the OpenLDAP libraries.
     

    LDAP SSL AND STARTTLS PARAMETERS

    
    
    If you're using the OpenLDAP libraries compiled with SSL
    support, Postfix can connect to LDAP SSL servers and can
    issue the STARTTLS command.
    

    LDAP SSL service can be requested by using a LDAP SSL URL in the server_host parameter:
         server_host = ldaps://ldap.example.com:636

    STARTTLS can be turned on with the start_tls parameter:
         start_tls = yes

    Both forms require LDAP protocol version 3, which has to be set explicitly with:
         version = 3

    If any of the Postfix programs querying the map is configured in master.cf to run chrooted, all the certificates and keys involved have to be copied to the chroot jail. Of course, the private keys should only be readable by the user "postfix".

    The following parameters are relevant to LDAP SSL and STARTTLS:

    start_tls (default: no)
    Whether or not to issue STARTTLS upon connection to the server. Don't set this with LDAP SSL (the SSL session is setup automatically when the TCP connection is opened).
    tls_ca_cert_dir (No default; set either this or tls_ca_cert_file)
    Directory containing X509 Certificate Authority certificates in PEM format which are to be recognized by the client in SSL/TLS connections. The files each contain one CA certificate. The files are looked up by the CA subject name hash value, which must hence be available. If more than one CA certificate with the same name hash value exist, the extension must be different (e.g. 9d66eef0.0, 9d66eef0.1 etc). The search is performed in the ordering of the extension number, regardless of other properties of the certificates. Use the c_rehash utility (from the OpenSSL distribution) to create the necessary links.
    tls_ca_cert_file (No default; set either this or tls_ca_cert_dir)
    File containing the X509 Certificate Authority certificates in PEM format which are to be recognized by the client in SSL/TLS connections. This setting takes precedence over tls_ca_cert_dir.
    tls_cert (No default; you must set this)
    File containing client's X509 certificate to be used by the client in SSL/ TLS connections.
    tls_key (No default; you must set this)
    File containing the private key corresponding to the above tls_cert.
    tls_require_cert (default: no)
    Whether or not to request server's X509 certificate and check its validity when establishing SSL/TLS connections.
    tls_random_file (No default)
    Path of a file to obtain random bits from when /dev/[u]random is not available, to be used by the client in SSL/TLS connections.
    tls_cipher_suite (No default)
    Cipher suite to use in SSL/TLS negotiations.
     

    EXAMPLE

    
    
    Here's a basic example for using LDAP to look up local(8)
    aliases.
    Assume that in main.cf, you have:
    
         alias_maps = hash:/etc/aliases,
             ldap:/etc/postfix/ldap-aliases.cf

    and in ldap:/etc/postfix/ldap-aliases.cf you have: server_host = ldap.my.com
    search_base = dc=my, dc=com

    Upon receiving mail for a local address "ldapuser" that isn't found in the /etc/aliases database, Postfix will search the LDAP server listening at port 389 on ldap.my.com. It will bind anonymously, search for any directory entries whose mailacceptinggeneralid attribute is "ldapuser", read the "maildrop" attributes of those found, and build a list of their maildrops, which will be treated as RFC822 addresses to which the message will be delivered.  

    SEE ALSO

    postmap(1), Postfix lookup table manager
    postconf(5), configuration parameters
    mysql_table(5), MySQL lookup tables
    pgsql_table(5), PostgreSQL lookup tables
    
     

    README FILES

    
    
    Use "postconf readme_directory" or
    "postconf html_directory" to locate this information.
    
    
    DATABASE_README, Postfix lookup table overview
    LDAP_README, Postfix LDAP client guide
    
     

    LICENSE

    
    
    The Secure Mailer license must be distributed with this software.
     
    

    AUTHOR(S)

    
    
    Carsten Hoeger,
    Hery Rakotoarisoa,
    John Hensley,
    Keith Stevenson,
    LaMont Jones,
    Liviu Daia,
    Manuel Guesdon,
    Mike Mattice,
    Prabhat K Singh,
    Sami Haahtinen,
    Samuel Tardieu,
    Victor Duchovni,
    and many others.
    


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    BACKWARDS COMPATIBILITY
    LIST MEMBERSHIP
    GENERAL LDAP PARAMETERS
    LDAP SSL AND STARTTLS PARAMETERS
    EXAMPLE
    SEE ALSO
    README FILES
    LICENSE
    AUTHOR(S)


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру