The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

sane-sm3600 (5)
  • >> sane-sm3600 (5) ( Разные man: Форматы файлов )
  •  

    NAME

    sane-sm3600 - SANE backend for Microtek scanners with M011 USB chip
     
    

    DESCRIPTION

    The sane-sm3600 library implements a SANE (Scanner Access Now Easy) backend that provides access to some Microtek scanners with the Toshiba M011 custom USB chip. This backend should be considered alpha.

    There are also backends for Microtek scanners with SCSI command set. Refer to sane-microtek(5) and sane-microtek2(5) for details.

    At present, the following scanners are known positively to work with this backend:

    Vendor     Product id:     Remark:
    --------   --------------  -----------
    Microtek   ScanMaker 3600  all modes ok
    Microtek   ScanMaker 3700  reported to work
    Microtek   ScanMaker 3750  reported to work
    

    If you own a Microtek scanner with the M011 chip other than the ones listed above, it may or may not work with SANE!

     

    FRONTEND OPTIONS

    This backend dynamically enables the options for the frontend, that are supported by the scanner in dependence of the scanning-mode and other options. Not supported options are disabled.

    The following options are supported by the Microtek2-driver:

    Color, grayscale, halftone and lineart scans.

    contrast, brightness, control, gamma correction.

     

    DEVICE NAMES

    This backend does not support device names in a standardized form.

     

    CONFIGURATION

    This backend does not support a configuration file right now.

     

    FILES

    /usr/lib/sane/libsane-sm3600.a
    The static library implementing this backend.
    /usr/lib/sane/libsane-sm3600.so
    The shared library implementing this backend (present on systems that support dynamic loading).

     

    ENVIRONMENT

    SANE_DEBUG_SM3600
    If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. E.g., a value of 128 requests all debug output to be printed. Smaller levels reduce verbosity. To see error messages on stderr set SANE_DEBUG_SM3600 to 1.


    E.g. just say:
    export SANE_DEBUG_SM3600=5

     

    SEE ALSO

    sane-microtek2(5), http://sm3600.sourceforge.net

     

    AUTHOR


    Marian Eichholz ([email protected])
    Glenn Ramsey ([email protected])


     

    Index

    NAME
    DESCRIPTION
    FRONTEND OPTIONS
    DEVICE NAMES
    CONFIGURATION
    FILES
    ENVIRONMENT
    SEE ALSO
    AUTHOR


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру