The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

sane-umax1220u (5)
  • >> sane-umax1220u (5) ( Разные man: Форматы файлов )
  •  

    NAME

    sane-umax1220u - SANE backend for the UMAX Astra 1220U and similar scanners
    

     

    DESCRIPTION

    The sane-umax1220 library implements a SANE (Scanner Access Now Easy) backend for the the UMAX Astra 1220U and similar scanners.

    For more information on this backend, please visit http://umax1220u-sane.sourceforge.net/.

     

    UMAX ASTRA 1600U/2000U/2100U SUPPORT

    This backend is also able to drive the UMAX Astra 1600U/2000U/2100U. The 2100U is confirmed to work. For the other scanners no reports have been received yet. Please contact us and tell us if your scanner works ([email protected]).

     

    CONFIGURATION

    Usually, no manual configuration is necessary. The configuration file for this backend resides in /etc/sane.d/umax1220u.conf.

    Its contents is a list of device names that correspond to UMAX Astra scanners. Empty lines and lines starting with a hash mark (#) are ignored. A sample configuration file is shown below:

     #usb vendor product
     usb 0x1606 0x0010
     # Device list for non-linux systems
     /dev/scanner 
     /dev/usb/scanner0
    

    See sane-usb(5) for information on how to set the access permissions on the usb device files.

     

    FILES

    The backend configuration file:
    /etc/sane.d/umax1220u.conf
    The static library implementing this backend:
    /usr/lib/sane/libsane-umax1220u.a
    The shared library implementing this backend:
    /usr/lib/sane/libsane-umax1220u.so (present on systems that support dynamic loading)

     

    ENVIRONMENT

    SANE_DEBUG_UMAX1220U
    If the library was compiled with debug support enabled, this environment variable controls the debug level for this backend. E.g., a value of 128 requests all debug output to be printed. Smaller levels reduce verbosity:

    SANE_DEBUG_UMAX1220U values

    Number  Remark
     
     1       print failures
     2       print information
     3       print high-level function calls
     4       print high-level function checkpoints
     9       print mid-level function calls
     10      print mid-level function checkpoints
     80      print protocol-level function entry
     90      print protocol-level function exit
    

    Example:
    export SANE_DEBUG_UMAX1220U=10

     

    KNOWN BUGS

    600 dpi scanning may fail for large image sizes.

    If you keep getting I/O errors, try cycling the power on your scanner to reset it.

    There is no way to cancel a scan, since the driver ignores sane_cancel().

    If you try scanning an image which is too small, you will get I/O errors. Be sure to adjust the scan area before doing a scan, since by default, the scan area is zero.

     

    SEE ALSO

    sane(7), sane-usb(5)

    (Old) homepage:
    http://umax1220u-sane.sourceforge.net/

     

    AUTHOR

    Marcio Luis Teixeira <[email protected]>

     

    EMAIL-CONTACT

    [email protected]

     

    REPORTING BUGS

    This backend isn't actively maintained. Nevertheless, bug reports and comments should be sent to the sane-devel mailing list. When reporting bugs, please run the backend with SANE_DEBUG_UMAX1220U set to 10 and attach a copy of the log messages.


     

    Index

    NAME
    DESCRIPTION
    UMAX ASTRA 1600U/2000U/2100U SUPPORT
    CONFIGURATION
    FILES
    ENVIRONMENT
    KNOWN BUGS
    SEE ALSO
    AUTHOR
    EMAIL-CONTACT
    REPORTING BUGS


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру